Reverb pan

This forum is for talking about all kinds of Peavey guitar amplifiers.
Post Reply
Bill W
New Member
Posts: 3
Joined: Wed Apr 18, 2012 9:10 pm

Reverb pan

Post by Bill W » Wed Apr 18, 2012 9:13 pm

Hi, Im in need of a reverb pan and FSwitch for a Special 112. Thanks

User avatar
Enzo
Member
Posts: 9535
Joined: Fri Sep 12, 2008 10:24 pm
Location: Lansing, Michigan

Re: Reverb pan

Post by Enzo » Thu Apr 19, 2012 2:20 am

Don't know that you will find the FS in stock, but PV parts department is the place to start.

Is your reverb bad or missing? If bad, look on it for numbers. 4EB2C1B or similar would be the generic type. The industry number to find at suppliers all over. A long all numbers one probably starting with a 7 would be the Peavey part number.

If you are missing the reverb pan, then don't forget it will need cables back up to thye chassis.

Bill W
New Member
Posts: 3
Joined: Wed Apr 18, 2012 9:10 pm

Re: Reverb pan

Post by Bill W » Wed Apr 25, 2012 9:31 am

Thanks for the info...........

Post Reply