6505 + 112 led logo
6505 + 112 led logo
hello I just bought a 6505+112 combo and noticed the LED's on the Peavey logo do not light up everything else works tone is not affected. Is this a common problem? is it somthing simple? is the logo fuse driven meaning a seperate fuse for the logo?
Re: 6505 + 112 led logo
If it is new, you have a warranty, so take it back and have them make it right under warranty. That is what warranties are for.
If you bought it used, then we have to fix it. There are a couple wires to it from the corner of the main board, those could be loose, the thing itself could have some sort of problem. The schematic doesn't cover it so I cannot refer to specific parts. It isn;t a space probe, so the works are not complex.
If you bought it used, then we have to fix it. There are a couple wires to it from the corner of the main board, those could be loose, the thing itself could have some sort of problem. The schematic doesn't cover it so I cannot refer to specific parts. It isn;t a space probe, so the works are not complex.
Re: 6505 + 112 led logo
No I bought it used so it is on me I have not removed the chassis just looking through the back it does not look like it came unplugged or a bad solder joint that I can see.