Qw2 and Versarray 218 Vsx 26 settings

This forum is for discussions on the various types of Peavey processors and effects.
Post Reply
jamescg
Member
Posts: 61
Joined: Mon Sep 15, 2008 8:34 am

Qw2 and Versarray 218 Vsx 26 settings

Post by jamescg » Sun Jun 01, 2014 5:17 pm

I have several QW-2's and Versarray 218's. I have downloaded the VSX 26 preset for the Qw2-218. What modification should i make to this file in regards to adding the Versarray 218's.. Will be running this System ( THREE WAY) I will be running all amps at 4ohms stereo. One Versarray 218 per side.I Have Several QSC Powerlight 9.0 PFC amps for the Versarray 218's. the amp specs are: I will be running Cs 2000's and CS 4080"s on QW-2"s, all at 4ohms Stereo.


4 ohms FTC 0.1%THD 20 Hz-20 kHz 3200 watts
4 ohms EIA 1.0% THD 1 kHz 3400 watts
Voltage Gain (in dB) 40x (32
Damping Factor (1 kHz and below) 2000
Signal to Noise (20 Hz-20 kHz) 107
input Sensitivity @ 8 ohms (in Vrms) 3.0

Marty McCann
Member
Posts: 4478
Joined: Mon Oct 27, 2008 3:50 pm

Re: Qw2 and Versarray 218 Vsx 26 settings

Post by Marty McCann » Sun Jun 01, 2014 9:02 pm

PM me your phone number and I maybe able to help quicker than several E-mails.

Post Reply