Running a Vyp 3 into Acoustica MixCraft6
= engage the Arm/Record switch, amp/speaker signal is muted and sound is sent to monitors.
= Disengage the Arm/Record switch monitor signal is muted BUT sound is not sent back to the amp/speaker
Running USB and ASIO4ALL....
Anyone having this problem ? And does anyone have a cure ?
Arm n Disarm Record mode / Vypyr 3
-
- New Member
- Posts: 9
- Joined: Sat Feb 15, 2014 3:50 pm
-
- Member
- Posts: 266
- Joined: Tue May 01, 2012 8:58 am
- Location: Crossroads of America
Re: Arm n Disarm Record mode / Vypyr 3
Might be that ASIO4All is a WDM "wrapper", and Windows isn't releasing the audio back to the amp. ?? Dunno. Does Mixcraft have a "monitor" switch where you can decide which mode of monitoring you want to use? Do you have Audacity or similar (ie: download and evaluate Reaper) that you could do a "test" in another app, and see if it behaves similarly?
'Nother thang: do your audio settings match between Windows and Mixcraft? ie: 44.1kHz at 16-bits, or whatever?
'Nother thang: do your audio settings match between Windows and Mixcraft? ie: 44.1kHz at 16-bits, or whatever?