VYPYR 60 SANPERA PINOUT FOR BEHRINGER FCB1010

A forum for discussing the Vypyr series amplifiers, Sanpera footswitches and share settings
Post Reply
frac82
Member
Posts: 19
Joined: Fri Jan 09, 2015 2:27 am

VYPYR 60 SANPERA PINOUT FOR BEHRINGER FCB1010

Post by frac82 » Wed Apr 29, 2015 5:31 am

good afternoon. let's assume that he midi board schematics from here is correct, i.e.:
  • P1 - not connected
  • P2 - not connected
  • P3 - not connected
  • P4 - midi IN pos. (+)
  • P5 - midi IN neg. (-)
  • P6 - unregistered
  • P7 - footswitch midi out
  • P8 - ground
so, if somebody would like to assemble a custom 8 pin DIN to 5 pin DIN cable to make a properly modded FCB1010 by Behringer work and be phantom powered (on tube Vypyrs) how should he/she should manage the connections?
i mean:
  • is correct to say that pin 4 carries VCC+ and pin 5 carries VCC-, i.e. the power supply?
  • what does "unregistered" on pin 6 stand for?
  • what is pin 7 (footswitch midi out) precisely needed for?

User avatar
wmjones
Member
Posts: 524
Joined: Sun Oct 20, 2013 1:39 pm

Re: VYPYR 60 SANPERA PINOUT FOR BEHRINGER FCB1010

Post by wmjones » Wed Apr 29, 2015 2:50 pm

frac82 wrote:good afternoon. let's assume that he midi board schematics from here is correct, i.e.:
  • P1 - not connected
  • P2 - not connected
  • P3 - not connected
  • P4 - midi IN pos. (+)
  • P5 - midi IN neg. (-)
  • P6 - unregistered
  • P7 - footswitch midi out
  • P8 - ground
so, if somebody would like to assemble a custom 8 pin DIN to 5 pin DIN cable to make a properly modded FCB1010 by Behringer work and be phantom powered (on tube Vypyrs) how should he/she should manage the connections?
i mean:
  • is correct to say that pin 4 carries VCC+ and pin 5 carries VCC-, i.e. the power supply?
  • what does "unregistered" on pin 6 stand for?
  • what is pin 7 (footswitch midi out) precisely needed for?
The sanpera gets it's power from pins 7 and 8. It might be possible to use pins 2 and 3 on the fcb1010 for phantom power.
8) HAPPY DAYS:

frac82
Member
Posts: 19
Joined: Fri Jan 09, 2015 2:27 am

Re: VYPYR 60 SANPERA PINOUT FOR BEHRINGER FCB1010

Post by frac82 » Thu Apr 30, 2015 9:18 am

wmjones wrote:The sanpera gets it's power from pins 7 and 8. It might be possible to use pins 2 and 3 on the fcb1010 for phantom power.
so footswitch midi out and ground are for Sanpera phantom power?
and what about P6 - unregistered: what is it for?

User avatar
wmjones
Member
Posts: 524
Joined: Sun Oct 20, 2013 1:39 pm

Re: VYPYR 60 SANPERA PINOUT FOR BEHRINGER FCB1010

Post by wmjones » Thu Apr 30, 2015 2:13 pm

I have no idea what unregistered is. ( my guess is it is reserved for future use or update.)
8) HAPPY DAYS:

frac82
Member
Posts: 19
Joined: Fri Jan 09, 2015 2:27 am

Re: VYPYR 60 SANPERA PINOUT FOR BEHRINGER FCB1010

Post by frac82 » Mon May 04, 2015 3:14 am

wmjones wrote:I have no idea what unregistered is. ( my guess is it is reserved for future use or update.)
thank you so much wmjones! then, summing up: pins 4&5 for midi signals, 7&8 for phantom power; correct?

Post Reply