A forum for discussing the Vypyr series amplifiers, Sanpera footswitches and share settings
-
frac82
- Member
- Posts: 19
- Joined: Fri Jan 09, 2015 2:27 am
Post
by frac82 » Wed Apr 29, 2015 5:31 am
good afternoon. let's assume that he midi board schematics from
here is correct, i.e.:
- P1 - not connected
- P2 - not connected
- P3 - not connected
- P4 - midi IN pos. (+)
- P5 - midi IN neg. (-)
- P6 - unregistered
- P7 - footswitch midi out
- P8 - ground
so, if somebody would like to assemble a custom 8 pin DIN to 5 pin DIN cable to make a properly modded FCB1010 by Behringer work and be phantom powered (on tube Vypyrs) how should he/she should manage the connections?
i mean:
- is correct to say that pin 4 carries VCC+ and pin 5 carries VCC-, i.e. the power supply?
- what does "unregistered" on pin 6 stand for?
- what is pin 7 (footswitch midi out) precisely needed for?
-
wmjones
- Member
- Posts: 524
- Joined: Sun Oct 20, 2013 1:39 pm
Post
by wmjones » Wed Apr 29, 2015 2:50 pm
frac82 wrote:good afternoon. let's assume that he midi board schematics from
here is correct, i.e.:
- P1 - not connected
- P2 - not connected
- P3 - not connected
- P4 - midi IN pos. (+)
- P5 - midi IN neg. (-)
- P6 - unregistered
- P7 - footswitch midi out
- P8 - ground
so, if somebody would like to assemble a custom 8 pin DIN to 5 pin DIN cable to make a properly modded FCB1010 by Behringer work and be phantom powered (on tube Vypyrs) how should he/she should manage the connections?
i mean:
- is correct to say that pin 4 carries VCC+ and pin 5 carries VCC-, i.e. the power supply?
- what does "unregistered" on pin 6 stand for?
- what is pin 7 (footswitch midi out) precisely needed for?
The sanpera gets it's power from pins 7 and 8. It might be possible to use pins 2 and 3 on the fcb1010 for phantom power.
HAPPY DAYS:
-
frac82
- Member
- Posts: 19
- Joined: Fri Jan 09, 2015 2:27 am
Post
by frac82 » Thu Apr 30, 2015 9:18 am
wmjones wrote:The sanpera gets it's power from pins 7 and 8. It might be possible to use pins 2 and 3 on the fcb1010 for phantom power.
so
footswitch midi out and
ground are for Sanpera phantom power?
and what about
P6 - unregistered: what is it for?
-
wmjones
- Member
- Posts: 524
- Joined: Sun Oct 20, 2013 1:39 pm
Post
by wmjones » Thu Apr 30, 2015 2:13 pm
I have no idea what unregistered is. ( my guess is it is reserved for future use or update.)
HAPPY DAYS:
-
frac82
- Member
- Posts: 19
- Joined: Fri Jan 09, 2015 2:27 am
Post
by frac82 » Mon May 04, 2015 3:14 am
wmjones wrote:I have no idea what unregistered is. ( my guess is it is reserved for future use or update.)
thank you so much
wmjones! then, summing up: pins 4&5 for midi signals, 7&8 for phantom power; correct?