Vypyr T60 and Sanpera 2 Just reset itself...

A forum for discussing the Vypyr series amplifiers, Sanpera footswitches and share settings
User avatar
JamesPaul
Member
Posts: 2477
Joined: Fri Sep 12, 2008 7:28 pm
Location: Moving Towards Adam Brown's State

Re: Vypyr T60 and Sanpera 2 Just reset itself...

Post by JamesPaul » Tue May 12, 2015 6:40 pm

If it still doesn't work, try cleaning the USB port on the T60.

You could also open it up and if there's a connector between the board and the USB jack, clean and reseat it. There are stories below where internal connectors had come loose or were plugged in one pin off. Be cautious and respect the high voltages in tube amplifiers.
Enzo wrote:I find if the amp is working, that is a good point to stop fixing it.
James Paul's Peaveys
Decade, Classics, Ecoustic, Windsors, VYPYR, Triple XXX, XXL, VKs, Bandit, JSXs, VIP, Piranha and a Penta.

Post Reply