Dead Vypyr 75

A forum for discussing the Vypyr series amplifiers, Sanpera footswitches and share settings
Post Reply
Pet_Peavey
Member
Posts: 23
Joined: Sat Oct 24, 2015 1:15 am

Dead Vypyr 75

Post by Pet_Peavey » Thu Nov 05, 2015 12:52 pm

Oh man after only 3 days of use it now wont power up, I bought it used from Guitar Center and its still within the 30 day warranty but I would have to drive 2 hours round trip to return it..what a shame has I was diggin the amp..its probably the fuse but if I mess up the fuse replacement guitar center might not refund my money plus I don't know what fuse to replace it with anyways ( not in the manual)..what a shame.
2000 Epiphone Les Paul Standard. Peavey Vypyr 75

User avatar
Rocco Crocco
Member
Posts: 123
Joined: Sat Nov 01, 2014 5:09 am
Location: Bensalem, PA

Re: Dead Vypyr 75

Post by Rocco Crocco » Thu Nov 05, 2015 1:14 pm


Pet_Peavey
Member
Posts: 23
Joined: Sat Oct 24, 2015 1:15 am

Re: Dead Vypyr 75

Post by Pet_Peavey » Thu Nov 05, 2015 1:55 pm

Thanks Rocco for the link..yup its the fuse I put a jumper on and plugged it in and it came on..I turned it back off..ive got some work to do :D
2000 Epiphone Les Paul Standard. Peavey Vypyr 75

User avatar
Rocco Crocco
Member
Posts: 123
Joined: Sat Nov 01, 2014 5:09 am
Location: Bensalem, PA

Re: Dead Vypyr 75

Post by Rocco Crocco » Thu Nov 05, 2015 2:33 pm

Yup good luck!

Pet_Peavey
Member
Posts: 23
Joined: Sat Oct 24, 2015 1:15 am

Re: Dead Vypyr 75

Post by Pet_Peavey » Thu Nov 05, 2015 3:25 pm

Ok I'm back from Radio Shack..total cost was $14.40 for the 22 gauge wire, screw cap fuse mount # 270 0364, 3 amp 250 volt fuses # 270 1009...now its time to roll up my sleeves and get er done...
2000 Epiphone Les Paul Standard. Peavey Vypyr 75

Pet_Peavey
Member
Posts: 23
Joined: Sat Oct 24, 2015 1:15 am

Re: Dead Vypyr 75

Post by Pet_Peavey » Thu Nov 05, 2015 4:01 pm

It works, I fired it up 4 times just to make sure.. :D now I drill out a suitable holding hole..
Attachments
WP_20151105_009.jpg
WP_20151105_009.jpg (1.17 MiB) Viewed 4030 times
WP_20151105_015.jpg
WP_20151105_015.jpg (1.2 MiB) Viewed 4030 times
WP_20151105_012.jpg
WP_20151105_012.jpg (1.25 MiB) Viewed 4030 times
2000 Epiphone Les Paul Standard. Peavey Vypyr 75

User avatar
Rocco Crocco
Member
Posts: 123
Joined: Sat Nov 01, 2014 5:09 am
Location: Bensalem, PA

Re: Dead Vypyr 75

Post by Rocco Crocco » Thu Nov 05, 2015 4:10 pm

Nice work... is your helper Siamese?

Pet_Peavey
Member
Posts: 23
Joined: Sat Oct 24, 2015 1:15 am

Re: Dead Vypyr 75

Post by Pet_Peavey » Thu Nov 05, 2015 4:44 pm

Yes he is Siamese :lol: , well I drilled out the hole and buffed out the shards and its all set to be loaded back into cabinet..Thanks Rocco for all your support..It was a fun project and it can blow fuses all it wants now, changing will be a breeze :lol: .. I wish I could do this for a living..Go team Peavey..We shall overcome!!
2000 Epiphone Les Paul Standard. Peavey Vypyr 75

Pet_Peavey
Member
Posts: 23
Joined: Sat Oct 24, 2015 1:15 am

Re: Dead Vypyr 75

Post by Pet_Peavey » Thu Nov 05, 2015 4:53 pm

:lol: :lol:
Attachments
V__D5B8.jpg
V__D5B8.jpg (338.9 KiB) Viewed 4021 times
2000 Epiphone Les Paul Standard. Peavey Vypyr 75

Post Reply