History and Timeline of the Peavey Bandit

This forum is for talking about all kinds of Peavey guitar amplifiers.
Post Reply
User avatar
GennyFan
Member
Posts: 1879
Joined: Fri Feb 05, 2010 2:11 am
Location: Dallas Texas USA
Contact:

History and Timeline of the Peavey Bandit

Post by GennyFan » Mon May 31, 2010 4:22 am

I thought I posted this already, but I can't find it, so here it is again, with some slight updates. If you see anything that needs correcting, or if you would like to add additional information, please feel free to do so.

***History and Timeline of the Peavey Bandit***

The Bandit

(1980) The very first Bandit was only made for one year. As subsequent versions became available, the original Bandit came to be known as the "Gunsmoke Bandit" because the font used to silkscreen the logo on the front of the amp resembled the font used in the opening credits of the popular 60's television show, Gunsmoke. The Gunsmoke Bandit was made in Meridian Mississippi USA and had a power rating of 50 watts RMS. It came equipped from the factory with a 12" guitar speaker made for Peavey by Eminence.


Solo Series Bandit (manual not available... Send me a message if you have one you can scan!)

(1981-1983) The Solo Series Bandit soon followed the Gunsmoke Bandit and incorporated a variety of improvements, most notably a much improved sound. The Solo Series Bandit was made in Meridian MS USA and came equipped with Peavey's proprietary guitar speaker, the Scorpion.


Solo Series Bandit 65

(1983-1987) With the Solo Series Bandit 65, large improvements in tone compared to the previous version were again realized and the power rating was increased to 65 watts RMS. The Bandit 65 was made in Meridian MS USA and came equipped with Peavey's proprietary guitar speaker, the Scorpion.


Solo Series Bandit 75

(1987-1989) The Solo Series Bandit 75 saw the power increase by 10 watts to 75 watts RMS and a Bright Switch was added. The Bandit 75 was made in Meridian MS USA and came equipped with Peavey's proprietary guitar speaker, the Scorpion.


Solo Series Bandit 112

(1989-1995) The Solo Series Bandit 112 introduced many new features, the most notable being an increase in power to 80 watts RMS and a choice between Peavey's Scorpion speaker and Peavey's newly introduced Sheffield speaker. Many of the innovations that would later be branded as "Transtube" were included in the Solo Series Bandit 112, but the name "Transtube" had not been adopted yet. There have been several different versions of the Solo Series Bandit 112 but they all share the same manual and the same control layout. One of the more popular variations is known as the "Teal Stripe" or "Blue Stripe" Bandit due to a blue horizontal stripe below the control panel. The Solo Series Bandit 112 was made in Meridian MS USA.


Transtube Series Bandit 112

(1995-1999) The Transtube Series Bandit 112 formally introduced Peavey's proprietary "Transtube" technology that allows a solid state amplifier to perform more like a vacuum tube amplifier. Central to the Transtube concept is a patented "power brake" that allows the user to control the amount of power required for dynamic range compression from the power amp, from 100% all the way down to 10%, thus enabling the amplifier to acheive power amp compression without running at full volume. The Transtube Series Bandit 112 was made in Meridian MS USA and came stock with the Sheffield 1230 speaker. Notably, it was also the first Bandit to have an external speaker jack, allowing external speakers to be run instead of or in parallel with the internal speaker. Running into 8 ohms, power is still 80 watts RMS, but running into 4 ohms (the equivalent of using the internal 8 ohm speaker together with an 8 ohm extension speaker) the power is increased to 100 watts RMS. Due to the horizontal strip of chrome underneath the controls, this version is commonly referred to as the "Silver Stripe" Bandit, but due to the black color and square shape, it is sometimes called the "Blackbox" Bandit (not to be confused with "Blackface", which refers to Fender products and/or performances in the style of Al Jolson...)


Transtube Series II Bandit 112 Made in USA

(2000-2004) With the Transtube Series II, the metal corners and input jacks that had been standard on all Peavey Bandits up until this time were replaced by plastic corners and plastic jacks. Due to a color scheme incorporating a red stripe across the front of the amplifier, many people refer to the Transtube Series II Bandit as the "Redstripe Bandit". During this time Peavey attempted to adopt a new company logo, and moved away from their traditional "pointy" logo. The new logo came to be known as the "Block Logo". The Block Logo was only used for a limited period of time, and the Block Logo Redstripe Bandits represent the last Peavey Bandits to be made in the USA.


Transtube Series II Bandit 112 Made in China

(2004-2005) This amp is cosmetically nearly identical to the USA version, so it is also referred to as "Redstripe Bandit", but there are several differences between the US built Redstripes and the Chinese ones. First, the Chinese version says, "Designed in the USA" on the front, while the actual USA version says "Designed and Made in the USA". Second, the speaker in the Chinese version is either unlabelled, or is labelled "Blue Marvel", a Peavey code for speakers made outside of Peavey and then rebranded as Peavey. All of the USA Redstripe Bandits shipped from the factory with US made Sheffield 1230 speakers. Another obvious difference is that all Chinese Redstripe Bandits have the "pointy logo", while most - but not all - of the USA Redstripe Bandits shipped with Block Logos.


Peavey Bandit with Transtube Technology

(2006-current) The current version of the Bandit is made in China. It is the first Bandit to incorporate a "simulated output" for recording purposes. This simulated output runs independently of the amp's internal speaker, allowing silent recording. The simulated output can also be used instead of or in addition to a traditional microphone. In this version the spring reverb has been replaced by a digital reverb circuit, and the 10% to 100% T. Dynamics knob is replaced by a 3-way switch, allowing operation at 25%, 50%, and 100% power. Metal corners are reintroduced, but the footswitch is no longer included with the amp and must be purchased separately. Due to the new oval logo that resembles an eye, this model is sometimes referred to as the "Cyclops" Bandit.
Last edited by GennyFan on Sat Dec 14, 2013 1:49 am, edited 4 times in total.

(heart) le Peavey
Member
Posts: 435
Joined: Sat Apr 17, 2010 2:54 am

Re: History and Timeline of the Peavey Bandit

Post by (heart) le Peavey » Mon May 31, 2010 8:16 am

Great work - thanks.

User avatar
mace&grace
Member
Posts: 64
Joined: Sat Apr 17, 2010 1:40 pm
Location: North Central, KY

Re: History and Timeline of the Peavey Bandit

Post by mace&grace » Mon May 31, 2010 8:53 am

Good review. It's always nice referring to someone smarter then me. :)

I'm going to pick that Revo112 up today. shot him another price & he bit on it.
1978 Mace, 1988 412M w/Celestions
Revolution 112
2005 Gibson LP Classic 1960 reissue
1975 Fender Strat
1963 Gibson ES335

pvholic
Member
Posts: 1377
Joined: Fri Sep 12, 2008 5:49 pm

Re: History and Timeline of the Peavey Bandit

Post by pvholic » Mon May 31, 2010 10:18 am

Great job Jason.

You Da man.

Looks like I want the last USA made Bandit. I have bought so many different models of Bandits, Specials, even the tilt back model ( Was 160 Watts and that huge and heavy Scorpion Ultra) and every model of the 212 Stereo Chorus 400 to the last model and I was going to every Namm show so I would sell the one I had if I liked the next new model, which I did! Hahahaha
" I Play Peavey..............or I DON'T Play!!! "

Charlie

User avatar
bleakanddivine
Member
Posts: 34
Joined: Thu Jan 07, 2010 7:48 am
Location: London, UK

Re: History and Timeline of the Peavey Bandit

Post by bleakanddivine » Mon May 31, 2010 1:37 pm

Good summary, the only detail I would point out is that the current Bandit manual is dated 2006, which might mean it was introduced earlier than 2008?
Gort. Klaatu barada nikto.

User avatar
GennyFan
Member
Posts: 1879
Joined: Fri Feb 05, 2010 2:11 am
Location: Dallas Texas USA
Contact:

Re: History and Timeline of the Peavey Bandit

Post by GennyFan » Mon May 31, 2010 2:19 pm

Thanks for the encouragement! As the true "Working Man's Amp" of my generation (80's and beyond), the Bandit holds a special place in my heart.
bleakanddivine wrote:Good summary, the only detail I would point out is that the current Bandit manual is dated 2006, which might mean it was introduced earlier than 2008?
Excellent observation! I think you're right, I changed the dates on the post above. Most of this I'm just going from memory, and through much of the 80's and well into the 90's, my memory was impaired by err... substances.... lol :? :oops: :wink:

I recently learned that the last of the Red Stripe Revolutions came with digital reverb, so it seems that the last Revos may have been used as a test-bed for the most recent Bandits. However, it makes me wonder if there were any Chinese Redstripes that came with digital reverb...

LBNL, Due to cosmetics, I like the name "Codpiece Bandit" for the most recent Bandit, but is there another name besides "the latest" or "Codpiece" that can be used to describe this version? Any reason why we should NOT call it the Codpiece Bandit?

User avatar
Frank N. Peavey
Member
Posts: 1108
Joined: Sat Sep 13, 2008 7:03 am
Location: PVnooga, TN
Contact:

Re: History and Timeline of the Peavey Bandit

Post by Frank N. Peavey » Tue Jun 01, 2010 6:31 am

As a long time Bandit user and fan I thank you for the research and for sharing this with us.

Been rocking the same Bandit since 1885. :wink:
Tony
ITOC #05-00013

T-63, 5 T-60s, T-20, Hydra, Mantis LT, Mystic, Odyssey, 3 Patriot tremolos, Patriot Bass, 2 Predators, 2 Raptor I, Razer, Reactor, Retro Fire, 3 Rockmasters, 2 Bandits, Backstage, Vypyr 30, Vypyr VIP 2

Classic30inCincy
Member
Posts: 31315
Joined: Fri Sep 12, 2008 3:10 pm
Location: The Mountain Retreat [Cincinnati Ohio]

Re: History and Timeline of the Peavey Bandit

Post by Classic30inCincy » Tue Jun 01, 2010 8:13 am

1885 :?: :oops:

Before Electric :!: :oops:

How Dat Work :?: :shock: :lol:

PAF Classic Series Tube Kit.......Created By Classic30inCincy
Majic Mojo Tradename..........Created By Classic30inCincy
Graduate Of Joe Friday / Dragnet School Of Correspondence
Doctorate Degree Diplomacy From Royal Order Possum Lodge

User avatar
Frank N. Peavey
Member
Posts: 1108
Joined: Sat Sep 13, 2008 7:03 am
Location: PVnooga, TN
Contact:

Re: History and Timeline of the Peavey Bandit

Post by Frank N. Peavey » Tue Jun 01, 2010 10:14 am

1985, but seems like 1885. :lol:
Tony
ITOC #05-00013

T-63, 5 T-60s, T-20, Hydra, Mantis LT, Mystic, Odyssey, 3 Patriot tremolos, Patriot Bass, 2 Predators, 2 Raptor I, Razer, Reactor, Retro Fire, 3 Rockmasters, 2 Bandits, Backstage, Vypyr 30, Vypyr VIP 2

twang_banger
Member
Posts: 360
Joined: Tue Sep 23, 2008 8:38 am
Location: Sweet Home ...

Re: History and Timeline of the Peavey Bandit

Post by twang_banger » Tue Jun 01, 2010 6:48 pm

GennyFan wrote: Transtube Series II Bandit 112 Made in USA
(2000-2004) During this time Peavey attempted to adopt a new company logo, and moved away from their traditional "pointy" logo. The new logo came to be known as the "Block Logo". The Block Logo was only used for a limited period of time, and the Block Logo Redstripe Bandits represent the last Peavey Bandits to be made in the USA.

Transtube Series II Bandit 112 Made in China
(2004-2006) Another obvious difference is that all Chinese Redstripe Bandits have the "pointy logo", while most - but not all - of the USA Redstripe Bandits shipped with Block Logos.
Thanks for the history lesson GennyFan. Good info.

"most - but not all -" True. My pointy & block both Made in Mississippi.
Last edited by twang_banger on Sun Jul 06, 2014 8:27 am, edited 1 time in total.

User avatar
BigNorm
New Member
Posts: 3
Joined: Wed Apr 07, 2010 10:50 pm

Re: History and Timeline of the Peavey Bandit

Post by BigNorm » Sat Jun 12, 2010 9:01 pm

In the 80's I had that Bandit 65 and was so please with it. That made me buy the Last USA made version of the Bandit that I still use for gigging and still as happy has I was in the 80's with my 65.
Thanks for the research.

savio
New Member
Posts: 1
Joined: Mon Aug 23, 2010 8:15 am

Re: History and Timeline of the Peavey Bandit

Post by savio » Mon Aug 23, 2010 8:18 am

Great post mate!! Thanx a lot!! Just got the chinese red stripe, pointy logo bandit ;)... Love the sound, but the speaker (unmarked) is to trebby and harsh. Will be changing it soon...

User avatar
Wicked_Tone
Member
Posts: 171
Joined: Fri Mar 19, 2010 1:32 pm
Location: Atlanta, GA

Re: History and Timeline of the Peavey Bandit

Post by Wicked_Tone » Mon Aug 23, 2010 9:54 am

Awesome post! Thanks for providing a definitive history of the Bandit. I'm loving my teal stripe version, as I just got it last week and see what so many others have mentioned on this forum as to the versatility and tone this amp has in all its incarnations. 8)
Amps: VTM 120 head, Transtube Transformer 112, Marshall DSL 100, Fender Champ 600 w/Weber speaker & tweed mod
Peavey Cab: MS 4x12

dalrymple
Member
Posts: 2739
Joined: Mon Sep 15, 2008 8:12 pm

Re: History and Timeline of the Peavey Bandit

Post by dalrymple » Mon Aug 23, 2010 11:07 am

Wow, that's good work. Way too much time on your hands. LOL! Thanks.
Dalrymple

User avatar
WashburnTabu
Member
Posts: 1335
Joined: Thu Aug 13, 2009 11:04 pm
Location: Childersburg, Alabama

Re: History and Timeline of the Peavey Bandit

Post by WashburnTabu » Mon Aug 23, 2010 12:56 pm

Don't forget here; http://thebanditpage.info/
My name is WT, and I approve this opinion.

Post Reply