PR® 12D




 

Overview

The Peavey PR 12D is a powered, bi-amplified, two-way speaker system engineered to provide very high levels of performance in a compact powered loudspeaker. The PR 12D is capable of up to 120 dB peak SPL. The enclosure utilizes tough polypropylene in an injection-molded plastic trapezoidal form, with a coated steel grille to offer an attractive yet-durable powered speaker system. This two-way powered system is comprised of a 150 W class D power amplifier driving a 12" heavy duty woofer. The RX™14 compression driver is driven by a 50 W class D power amplifier and features a 1.4" titanium diaphragm coupled to an extremely smooth and well-controlled constant directivity horn (with a coverage pattern of 90? by 40?) that is molded integrally into the enclosure. A balanced input to the preamp/EQ electronics consists of one combo female XLR and 1/4" TRS phone jack. It is switchable between mic-level and line-level sensitivity. Two 1/4" phone jacks are provided for link-out / direct-in capability. The link-out is post- level and pre-crossover. While the direct-in is a direct pre-crossover input. A woofer servo senses back-EMF from the woofer voice coil that is not a result of the drive signal, and subtracts the error so that the woofer cone follows the drive waveform precisely. Constant Loudness (Fletcher-Munson) circuit for accenuating bass and treble at low listening volume levels. The power amplifiers providing the bi-amplification are low-distortion units providing 150 W continuous RMS into the nominal 8 ohm load of the woofer, and a 50 W continuous RMS into the nominal 8 ohm load of the tweeter. They were selected for their reliability and superb musical performance capability. Both amplifiers feature our DDT™ compression, which virtually eliminates audible power amplifier clipping. A molded-in handle provides ease of transport, while multiple mounting points (top and bottom) for the Peavey versamount™ allow maximum utility.

Features

  • Both power amps have DDT compression
  • 12" heavy duty woofer
  • Woofer servo for reduced woofer distortion
  • Automatic equal loudness (Fletcher-Munson)
  • RX 14 1.4" titanium compression driver
  • Peak SPL up to 120 dB with music!
  • Combo jack with 1/4" TRS & female XLR mic- or line-level balanced input
  • Two 1/4" phone jacks for link-out/direct-in capability
  • Molded-in horn with exceptionally smooth response and pattern control
  • Top and sides handgrips
  • Pole mount molded-in
  • Reduced weight
  • Top and bottom flying point inserts
  • Bi-amplified Class D powered system with 200 watt total power
  • Weight Unpacked: 33.44 lb(15.17 kg)
  • Weight Packed: 39.18 lb(17.77 kg)
  • Width Packed: 20.75"(52.705 cm)
  • Height Packed: 25.25"(64.135 cm)
  • Depth Packed: 16.25"(41.275 cm)

Downloads

Related Items








USA | English
[Change]
© 2014 Peavey Electronics. All Rights Reserved | Terms/Privacy