Flying/Rigging Information

CAUTION

Before attempting to suspend this speaker, consult with a certified structural engineer. Speaker can fall from improper suspension, resulting in serious injury, death, and property damage. Do not suspend or mount any other product or device from this enclosure! Use only the correct mating hardware. All associated rigging is the responsibility of others. Whenever possible, in addition to the nominal primary mounting method, use a suitable safety chain or wire rope attached to one of the other groups of fly point inserts, and firmly attached to a suitable structural member as indicated by a certified structural engineer. We recommend the use of Thread-locker at the insert point bolts, so the bolts cannot vibrate loose. Never transport the cabinet using the array bracket or other mounting brackets as a structural member, while the cabinet is mounted on an array bracket or other mounting bracket and unsupported otherwise, as this may unduly stress the mounting inserts.

This Peavey loudspeaker should be suspended overhead only in accordance with the procedures and limitations specified in the User's Manual and possible manual update notices. This system should be suspended with certified rigging hardware by a qualified rigging professional and in compliance with local, state and federal suspension ordinances.

DO NOT OVER TORQUE HARDWARE. ALWAYS USE SAFETY CHAIN. INSPECT RIGGING ANNUALLY.

When hanging multiple cabinets where such rigging is appropriate for that model, the maximum number of cabinets must be determined not just by the maximum WLL divided by the number of cabinet weights, but by using all loading and safety criteria, including allowance for wiring, both signal and AC power, as well as any additional safety wires, ropes or clamps involved. Halo and adaptor frame weights must be included as well.

If a speaker cabinet is rated for being flown or hung only by itself, then no other cabinets or loads other than minimal wiring properly supported can be allowed to be hung from that type of speaker cabinet.

SPECIFIC INFORMATION AND SPECIFICATIONS ABOUT FLY POINTS, RIGGING HARDWARE AND WLL DATA ARE AVAILABLE IN EACH INDIVIDUAL PRODUCT'S SPEC SHEET OR OWNER'S MANUAL. USE THE SEARCH FUNCTION ABOVE TO SEEK OUT THE CORRECT DOCUMENT FOR YOUR NEEDS.

Go to the products page, and then look for the Manual download link.