PVX™ 10 Passive Loudspeaker

$279.99

The Peavey PVX™ 10 is a two-way passive loudspeaker designed for live music, PA sound and permanent installations. It pairs a heavy-duty 10-inch woofer with an RX™ 10N compression driver featuring a 1-inch titanium diaphragm. Power handling is rated at 200W continuous, 400W program and 800W peak.

Peavey's Quadratic Throat Waveguide™ provides 100° horizontal × 60° vertical coverage. Its asymmetrical design angles the main sound energy down 10° toward the audience, helping reduce ceiling reflections for greater clarity and gain before feedback. The internal crossover includes high-frequency driver protection.

The rugged, injection-molded ABS enclosure features two handles, a molded-in pole mount and an angled side for floor-monitor use. A powder-coated perforated steel grille protects the drivers. Connections include a four-pin twist-lock connector in parallel with a 1/4-inch phone jack. Multiple mounting inserts support permanent installation; suspended installations require qualified professional assessment and adherence to the spec sheet's rigging and safety instructions.

SKU: 03620370
  • Two-way passive loudspeaker with a heavy-duty 10-inch woofer, 2-3/8-inch voice coil and 50 oz. magnet
  • RX™ 10N compression driver with a 1-inch titanium diaphragm
  • 200W continuous, 400W program and 800W peak power handling
  • Quadratic Throat Waveguide™ with 100° horizontal × 60° vertical coverage
  • Asymmetrical horn directs sound down 10° toward the audience
  • Internal crossover with high-frequency driver protection
  • Rugged injection-molded ABS enclosure with a powder-coated perforated steel grille
  • Angled cabinet side for floor-monitor use
  • Molded-in pole mount and two carrying handles
  • Four-pin twist-lock connector in parallel with a 1/4-inch phone jack
  • 8-ohm nominal impedance

$279.99

FAQ

Speaker Type Two-way passive sound reinforcement enclosure

Woofer 10-inch heavy-duty woofer with a 2-3/8-inch voice coil and 50 oz. magnet

High-Frequency Driver RX™ 10N compression driver with a 1-inch titanium diaphragm

Power Handling 200W continuous, 400W program, 800W peak

Frequency Range 52 Hz–20 kHz, measured at 1 meter on-axis in a half-space environment

Frequency Response 74 Hz–18 kHz (±3 dB), measured at 1 meter on-axis in an anechoic environment

Usable Low-Frequency Limit 57 Hz (−10 dB, anechoic)

Sensitivity 93 dB SPL at 1W/1 meter, with 2.83V input in an anechoic environment

Maximum SPL 116 dB continuous, 122 dB peak at 1 meter

Coverage 100° horizontal × 60° vertical, measured at the −6 dB points

Vertical Coverage Orientation Main polar lobe angled down 10°, producing +20°/−40° coverage relative to straight ahead

Waveguide Peavey Quadratic Throat Waveguide™

Nominal Impedance 8 ohms

Minimum Impedance 7 ohms

Box Tuning Frequency 67 Hz

Crossover Frequency 3.0 kHz, internal passive crossover

Driver Protection High-frequency driver protection

Input Connections One four-pin twist-lock connector in parallel with a 1/4-inch phone jack

Enclosure Material Injection-molded ABS plastic

Enclosure Finish Black textured surface

Grille Black powder-coated perforated steel

Floor-Monitor Configuration Additional 45° angled section on the right side of the enclosure

Pole Mount Molded-in cup for a standard 1-3/8-inch speaker stand pole

Mounting Inserts 13 cabinet inserts, including top and bottom mounting groups and a rear pull-back point

Handles Two, located at the top rear and right side

Feet Four rubber feet

Dimensions (H × W × D) 20.00 × 12.69 × 11.06 inches (508 × 322 × 281 mm)

Net Weight 25 lb (11.3 kg)

If you have questions concerning product operation, support or warranty, please Contact Us!

We can also be reached by phone at 877-732-8391 (toll free in the US).

WARNING: This product can expose you to chemicals, including DEHP, which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Find Your Perfect Match

Artists