412 wiring
-
- New Member
- Posts: 1
- Joined: Mon May 15, 2017 1:32 pm
412 wiring
Scored a slant cab but when i opened it. 2 8 ohm speakers and 2 16 ohm. How should this be wired? Using a ultra 120 head. Im a drummer this rig is for my 15 year old daughter want her learning right. Thanks people, ROCK ON!!!
Re: 412 wiring
The head is tubes so the impeadence is set by a switch.
Normally the speakers are all 8 ohms or all 16 ohms.
Best would be to swap/sell one set to get them all the same. In the mean time wire the two 16 ohm speakers in parallel to get an 8 ohm load and do not use the other 2 speakers.
Normally the speakers are all 8 ohms or all 16 ohms.
Best would be to swap/sell one set to get them all the same. In the mean time wire the two 16 ohm speakers in parallel to get an 8 ohm load and do not use the other 2 speakers.