I have a 2015 6505+ head and I am upgrading the tubes. My question is on the preamp tubes, when you take off the cover and are looking at the tubes from the back of the head are the order of tubes from left to right
V1, V2, V3, V4, V5, V6
I know on some amps they are not in order that way and I want to make sure I put the replacement tubes in the proper slot if that makes sense? I purchased a set from "Dougs Tubes" and here is their recommendation
V1 - Tung-Sol 12AX7
V2 - JJ ECC83
V3 - Ruby 7025SS HG
V4 - Ruby 7025SS HG
V5 - Ruby 7025SS HG
V6 - Sovtek 12AX7 LPS
I want to make sure I get these physically in the correct spot.....Thank you in advance
6505 Plus - Preamp Tube Configuration....help please
-
- New Member
- Posts: 7
- Joined: Sat Nov 01, 2008 7:32 am
Re: 6505 Plus - Preamp Tube Configuration....help please
I believe the layout is as follows, looking at the back of the amp left to right:
V4-V3-V5-V2-V1-V6
If this wrong, please correct me.
V4-V3-V5-V2-V1-V6
If this wrong, please correct me.
Last edited by Nibbles on Mon Jun 26, 2017 2:26 pm, edited 1 time in total.
Bun Splitter
Re: 6505 Plus - Preamp Tube Configuration....help please
That looks correct to me.