Tube Layout in PV Ranger 212
-
- Member
- Posts: 37
- Joined: Wed Mar 31, 2010 6:04 am
Tube Layout in PV Ranger 212
Does anyone here know the tube layout in a Ranger 212? Looking at the rear from right to left, and the specific function of each one of the 12AX7A's in there. Thanks.
Re: Tube Layout in PV Ranger 212
I don't know left from right, but the end nearest the input jacks is V1 end, and the four small tubes are V1-2-3-4 in that order.
V4 is the phase inverter, so it really part of the power amp.
V3 covers the preamp out (FX send) and the FX return.
V1a is the input stage for all channels, V1b is the clean channel.
V2 is only used for the drive channel. Both halves.
V4 is the phase inverter, so it really part of the power amp.
V3 covers the preamp out (FX send) and the FX return.
V1a is the input stage for all channels, V1b is the clean channel.
V2 is only used for the drive channel. Both halves.
-
- Member
- Posts: 37
- Joined: Wed Mar 31, 2010 6:04 am
Re: Tube Layout in PV Ranger 212
Thanks Enzo, much appreciated.