I have inherited an old Peavey 215 bass guitar cabinet. I really like the cabinet but one of the speakers is blown and I would like to find a replacement. Here is info from the plate on the back:
Peavey 215 enclosure 4 ohms
6E-31245
Anybody know where I can find out more info about the cabinet? Source for a replacement speaker?
Thanks in advance for any and all help!
Old 215 Cabinet
-
- Member
- Posts: 31315
- Joined: Fri Sep 12, 2008 3:10 pm
- Location: The Mountain Retreat [Cincinnati Ohio]
Re: Old 215 Cabinet
Peavey 15" bass speakers are available direct from Peavey via website.
"Products" page to "Instrument Speakers" to "Bass Speakers".
"Products" page to "Instrument Speakers" to "Bass Speakers".
PAF Classic Series Tube Kit.......Created By Classic30inCincy
Majic Mojo Tradename..........Created By Classic30inCincy
Graduate Of Joe Friday / Dragnet School Of Correspondence
Doctorate Degree Diplomacy From Royal Order Possum Lodge
Re: Old 215 Cabinet
Is there a good thread dedicated to peavey 215d cabs, and black widows (the old 1504's).. am refurbishing one as we speak and need info on port mods, dampening and wiring..
I added a few pieces of wood around the vents (all sides but the bottom since the rectangular ports are only about an inch away from the edge) so vent(s) length is effectively approx. 2"
Wondering if 2 older 1504's (4ohm) wired in series is as good as 2 1502's wired parallel?
Is there any benefit or detriment to putting a cross vent hole(s) between chambers? pp
I added a few pieces of wood around the vents (all sides but the bottom since the rectangular ports are only about an inch away from the edge) so vent(s) length is effectively approx. 2"
Wondering if 2 older 1504's (4ohm) wired in series is as good as 2 1502's wired parallel?
Is there any benefit or detriment to putting a cross vent hole(s) between chambers? pp