Peavey Milestone BXP Jazz Bass Wiring Help

This forum is for discussions on all kinds of Peavey basses.
Post Reply
jaxplanner
New Member
Posts: 1
Joined: Sat Nov 16, 2019 5:31 pm

Peavey Milestone BXP Jazz Bass Wiring Help

Post by jaxplanner » Sat Nov 16, 2019 6:16 pm

Two white wires came unsoldered from the neck volume pot and I am unsure where to solder them back. Can someone please help? Thanks in advance.
Attachments
E563E99C-F000-4C66-A2CF-27D91DC263BB.jpeg
E563E99C-F000-4C66-A2CF-27D91DC263BB.jpeg (2.28 MiB) Viewed 204 times

kodiakblair
Member
Posts: 249
Joined: Wed May 28, 2014 6:05 pm
Location: Scotland

Re: Peavey Milestone BXP Jazz Bass Wiring Help

Post by kodiakblair » Tue Nov 19, 2019 6:13 am

Hi jaxplanner

One of those "whites" should be black.

No matter,it's only a colour. With the pot lugs facing you, I'll number them 1 to 3. Left hand being 1.

There should be a white running from lug 1 on neck volume to lug 1 bridge volume,it then continues to lug 2 of the tone pot.
The other white (black) is a a ground soldered to the back of the volume pots.

You'll see what I mean from this PDF.
Attachments
MILESTONE III %26 Milestone BXP wiring.pdf
(36.11 KiB) Downloaded 28 times
Axcelerator,B-90,B-Quad,Cirrus,Dyna,Dyna/Unity,Foundations,Forum,Fury,Gbass,Grind,International,midibase,Milestone III, Millenniums,Patriot,Resolite,RJ-IV,Sarzo,3 T40,T45,T20,TL-5,Tragic,Unity,Void,Zephyr5,3 Zodiac.

Post Reply