Oil-finish Cleaning Tips
The following tips should be taken into consideration to retain the good looks of your oil-finished instrument:
Wash hands thoroughly before playing to minimize the effects of excessive dirt and skin acids. Wipe the instrument down with a soft, dry cloth after each use. The oil finish should be cleaned and replenished periodically, such as during string changes. We recommend using Peavey Lemon-oil for this but many of the commercially available fingerboard or lemon oils are suitable. Do not use oils containing stains or pigments as they may stain the instrument. Also, do not apply a paste wax to the neck. Paste wax is fine for oil finishes on instrument bodies and furniture, but it can cause a wax build up resulting in a "sticky" or "gummy" neck feel. Do not use water or alcohol-based polishes on the oil finished neck surface. They can raise the wood grain resulting in a rough surface texture and possibly cause damage to the neck.
Using a soft, clean cloth; apply only enough oil to moisten the wood surface. Allow the oil to absorb into the wood for a few minutes, and then wipe off any excess. If excessively dirty, apply the oil using a soft-bristled toothbrush, and gently scrub the surface to loosen and remove any dirt and grime. Wipe off any excess.
Oil-finish Cleaning Tips
This forum is for discussions on all kinds of Peavey basses.
Return to “Peavey Bass Guitars”
Jump to
- Rules and Guidelines
- ↳ Peavey® Forum Rules
- General Discussion
- ↳ Club Peavey
- Amplifiers
- ↳ Guitar Amplifiers
- ↳ Vypyr & Sanpera
- ↳ Bass Amplifiers
- ↳ Keyboard Amplifiers
- Instruments
- ↳ Peavey Guitars
- ↳ Peavey Bass Guitars
- Pro Audio
- ↳ Speakers/Enclosures
- ↳ Power Amplifiers
- ↳ Mixers
- ↳ Processors/Effects
- ↳ VSX
- ↳ Microphones
- ↳ Latest News
- ↳ AmpKit Link
- ↳ XPort USB Guitar Interface
- ↳ Architectural Acoustics Club
- ↳ AA Mixers
- ↳ AA Modules
- ↳ AA Power Amplifiers
- ↳ AA Signal Processors
- ↳ AA Speakers/Enclosures
- ↳ ReValver Discussions
- ↳ ReValver Support
- ↳ ReValver Presets
- ↳ ReValver Mk II
- ↳ Pristine Sounds