Hi All,
My Foundation 5 has some wear on the first 7 frets. Give that the bass is 27 years old, this is to be expected.
I'm considering doing a re-fret of entire neck. I've only fretted and re-fretted guitars, so I wanted some input on fret wire choice.
The Peavey manual states:
"the 21 frets are 18% nickel-silver which are medium height, highly crowned and polished".
I'm looking at the Stew-Mac Medium fret wire, and they have 4 versions (see chart)
Do any of you techies out there have any experience with re-fretting these basses, and which Medium fret wire would you recommend?
Many Thanks!
Rayzorxbass
Foundation 5 Fret Wire
-
- Member
- Posts: 15
- Joined: Tue Jan 17, 2017 3:27 pm
Foundation 5 Fret Wire
- Attachments
-
- Stew-Mac Medium Fret Wire
- FretWire.jpg (137.73 KiB) Viewed 2124 times
-
- Member
- Posts: 329
- Joined: Wed May 28, 2014 6:05 pm
- Location: Scotland
Re: Foundation 5 Fret Wire
If you're doing like for like then go for "medium/higher".
I put the digital calipers on my Foundation 5 and 2.3mm was the fret width.
I put the digital calipers on my Foundation 5 and 2.3mm was the fret width.
Axcelerator,B-90,B-Quad,Cirrus,Dyna,Dyna/Unity,Foundations,Forum,Fury,Gbass,Grind,International,midibase,Milestone III, Millenniums,Patriot,Resolite,RJ-IV,Sarzo,3 T40,T45,T20,TL-5,Tragic,Unity,Void,Zephyr5,3 Zodiac.
-
- Member
- Posts: 15
- Joined: Tue Jan 17, 2017 3:27 pm
Re: Foundation 5 Fret Wire
Thanks Kodiablair!
The sizing makes sense. And it's Dan Erlewine's favorite fret wire to boot.
Rayzorxbass
The sizing makes sense. And it's Dan Erlewine's favorite fret wire to boot.
Rayzorxbass