Peavy Project 2 Still Going
Peavy Project 2 Still Going
Still kicking at shows every weekend. MF1-X's still have original drivers in them. MB-2 & FH-1 have new modern baskets on original BW magnets.
- Attachments
-
- project2.jpg (318.03 KiB) Viewed 4046 times
Re: Peavy Project 2 Still Going
Nice! They always were the perfect height for side fills! What are you using to power them?
Dookie
Dookie
Re: Peavy Project 2 Still Going
We use 4 of those for outdoor shows. They all still have the original speakers in them also. They sound great but they are heavy, still love to hear them rocking. Mine have the date 1978 on them. seventies music through 70's speakers.
- studiodtk5
- Member
- Posts: 2262
- Joined: Sat Feb 20, 2010 1:39 pm
- Location: Toledo, Ohio
Re: Peavy Project 2 Still Going
Is that Neil Young on stage?
Darren
ITOC: 08-00190
Peavey stuff I have: Masterpiece 50, Custom Shop 212, Stereo Chorus 212, T-60, T-40, Signature Select, Odyssey II Prototype, Generation Custom EXP, Firenza P90-ACM, VB-2, Stomp Boxes, Radial Pro 1000, lots of mics, etc...
ITOC: 08-00190
Peavey stuff I have: Masterpiece 50, Custom Shop 212, Stereo Chorus 212, T-60, T-40, Signature Select, Odyssey II Prototype, Generation Custom EXP, Firenza P90-ACM, VB-2, Stomp Boxes, Radial Pro 1000, lots of mics, etc...
Re: Peavy Project 2 Still Going
Hey,
Upping this old subject, but little question : what do you use to amplify your Project 2 ?
I'm going to buy 2 Project 2 stacks but I don't really know what to use to amplify them...
Is an amplifier that kicks 2x 1200 W @ 4 Ohm enough ?
Thank you,
Pascal
Upping this old subject, but little question : what do you use to amplify your Project 2 ?
I'm going to buy 2 Project 2 stacks but I don't really know what to use to amplify them...
Is an amplifier that kicks 2x 1200 W @ 4 Ohm enough ?
Thank you,
Pascal