QW2 with VR218 VSX 26 preset

This forum is for discussions on all kinds of Peavey speakers and enclosures.
Post Reply
Mac10
New Member
Posts: 2
Joined: Thu May 11, 2017 12:10 pm

QW2 with VR218 VSX 26 preset

Post by Mac10 » Thu May 11, 2017 7:35 pm

Just got a pair of QW2's and downloaded the presets for the VSX 26 from Peavey. The VSX 26 bi-amp preset is totally screwed. I've seen a couple of posts from others here that have run the QW2 and VR218 combo successfully with tweaks to the existing QW presets on the VSX 26. If you guys would share your new presets for the QW2 with the VR218 with me that would be great. I would also like to get the corrected QW2 bi-amp preset.
BTW, I'm powering the subs and the mids with 2 crest pro 9200's and the highs with a crest pro 5200.

Your help will be greatly appreciated,

Mike

Bartman
Member
Posts: 600
Joined: Fri Sep 19, 2008 11:15 am

Re: QW2 with VR218 VSX 26 preset

Post by Bartman » Fri May 12, 2017 1:20 pm

Are you only bi-amping your system, or do you mean you are bi-amping the QW2 (which then when with subs means you are tri-amping your system)?

Mac10
New Member
Posts: 2
Joined: Thu May 11, 2017 12:10 pm

Re: QW2 with VR218 VSX 26 preset

Post by Mac10 » Fri May 12, 2017 2:04 pm

Both! I want to bi-amp the QW2's for smaller venues and tri-amp along with the VR218's for larger shows .

Bartman
Member
Posts: 600
Joined: Fri Sep 19, 2008 11:15 am

Re: QW2 with VR218 VSX 26 preset

Post by Bartman » Tue May 30, 2017 11:39 pm

I'll see if I can copy my settings to a flash drive then upload here, or if can't upload, I could send as an email attachment. I'll be setup this weekend so (if I remember) I'll save a copy then.

Post Reply