Help w Impulse 1015 crossover

This forum is for discussions on all kinds of Peavey speakers and enclosures.
Post Reply
kazorb
New Member
Posts: 2
Joined: Sat Sep 16, 2017 5:09 pm

Help w Impulse 1015 crossover

Post by kazorb » Sun Sep 17, 2017 6:55 am

My first post, Hi everyone!
I need your advice, I'll try to explain.

I was gifted a pair of 1015 cabs. The crossovers are gone. Cheapest place I can find for original is at Full Compass for 160ish each. The SP2 is a very similar speaker, and XOs for those are only 80ish (yes money is tight). What are the chances a SP2 XO will work good in a 1015? Would I be wasting my money?
Thank you so much!

Josjor
Member
Posts: 4229
Joined: Mon Sep 15, 2008 8:04 am

Re: Help w Impulse 1015 crossover

Post by Josjor » Sun Sep 17, 2017 4:26 pm

Slightly different woofers but the high frequency driver is the same. I'd say you'd be OK. The factory one for the Impulse has a CD horn EQ built in so you'll lose that, but I think you'd be fine for the budget you're working with.
www.yandasmusic.com
Don't believe me. I'm just guessing.
Neutiquam Erro

kazorb
New Member
Posts: 2
Joined: Sat Sep 16, 2017 5:09 pm

Re: Help w Impulse 1015 crossover

Post by kazorb » Sun Sep 17, 2017 4:48 pm

Thanks for your time!

Post Reply