I have a used VSX26 for sale. It has spent its entire life in a rack. It works perfectly and has the following presets installed:
SP2 / SP218
QW2 / QW218
Offering this for $150.00. I'll ship anywhere in the continental US.
PM me with your interest.
Thanks,
Tony
VSX26 For Sale
VSX26 For Sale
UncleTony
2 SP2, 2 SP218.
4 Peavey QW2, 4 Peavey QW218.
Rack 1: 2 xti 2000, 2 xti 4000, 1 IPR 1600 - VSX26
Rack 2: 2 xti 2000, 2 xti 4000, 1 IPR 1600
four PV15M.
1 PVM46, 1 PVM22, 1 PVM 45iR
http://www.thenephewslive.com, Galena, Ohio
2 SP2, 2 SP218.
4 Peavey QW2, 4 Peavey QW218.
Rack 1: 2 xti 2000, 2 xti 4000, 1 IPR 1600 - VSX26
Rack 2: 2 xti 2000, 2 xti 4000, 1 IPR 1600
four PV15M.
1 PVM46, 1 PVM22, 1 PVM 45iR
http://www.thenephewslive.com, Galena, Ohio
-
- New Member
- Posts: 2
- Joined: Fri Aug 23, 2019 2:32 pm
Re: VSX26 For Sale
interested vsx26 , i have 4 peavey qw2f and 4 peavey versarray 218s and 4 peavey cs4080 amps. are the sub and amp setting pre loaded as well as the qw2f settings.
Re: VSX26 For Sale
Here's what I would do. I would download the versarray preset from Peavey's website and then load this versarray preset to the vsx. Then I would make it the active preset. I would then use the "tools" section of the vsx and detail, write down, each of the v-218 specs. I would then load the QW preset, and again using "tools", enter the versarray specs for the subs, overwriting the QW 218 specs. I would then save this preset under a new name so as not to overwrite the QW preset already in the vsx. Voila.... a QW / V-218 preset.
Finally, I would buy an amp to drive the CD's in the QW2's. This would trim-amp the speakers.
I'm sure someone will correct me if I'm wrong.
Finally, I would buy an amp to drive the CD's in the QW2's. This would trim-amp the speakers.
I'm sure someone will correct me if I'm wrong.
UncleTony
2 SP2, 2 SP218.
4 Peavey QW2, 4 Peavey QW218.
Rack 1: 2 xti 2000, 2 xti 4000, 1 IPR 1600 - VSX26
Rack 2: 2 xti 2000, 2 xti 4000, 1 IPR 1600
four PV15M.
1 PVM46, 1 PVM22, 1 PVM 45iR
http://www.thenephewslive.com, Galena, Ohio
2 SP2, 2 SP218.
4 Peavey QW2, 4 Peavey QW218.
Rack 1: 2 xti 2000, 2 xti 4000, 1 IPR 1600 - VSX26
Rack 2: 2 xti 2000, 2 xti 4000, 1 IPR 1600
four PV15M.
1 PVM46, 1 PVM22, 1 PVM 45iR
http://www.thenephewslive.com, Galena, Ohio
Re: VSX26 For Sale
Hey Tony did you finally get out of everything or are you still going?
Re: VSX26 For Sale
Hey Gonzo78,
Didn't I buy a set of QW's from you?
Still going.
I still have the vsx. If anybody wants it, shoot me an offer. It's loaded with a QW preset and an SP preset.
I have 2 SP2's and 2 SP218's. They are used. The speakers are all 100%. The carpets do show some age and the carpets on the 218's have worn through at the wheels.
I have a Peavey IPR1600.
I have 2 Crown xti 2002's.
I have 1 Crown xti 6002.
I have 1 EWI rolling rack that houses all of the amps.
Seems like a lot but I had a lot more. All of this is for sale BTW.
Best regards,
Tony
Didn't I buy a set of QW's from you?
Still going.
I still have the vsx. If anybody wants it, shoot me an offer. It's loaded with a QW preset and an SP preset.
I have 2 SP2's and 2 SP218's. They are used. The speakers are all 100%. The carpets do show some age and the carpets on the 218's have worn through at the wheels.
I have a Peavey IPR1600.
I have 2 Crown xti 2002's.
I have 1 Crown xti 6002.
I have 1 EWI rolling rack that houses all of the amps.
Seems like a lot but I had a lot more. All of this is for sale BTW.
Best regards,
Tony
UncleTony
2 SP2, 2 SP218.
4 Peavey QW2, 4 Peavey QW218.
Rack 1: 2 xti 2000, 2 xti 4000, 1 IPR 1600 - VSX26
Rack 2: 2 xti 2000, 2 xti 4000, 1 IPR 1600
four PV15M.
1 PVM46, 1 PVM22, 1 PVM 45iR
http://www.thenephewslive.com, Galena, Ohio
2 SP2, 2 SP218.
4 Peavey QW2, 4 Peavey QW218.
Rack 1: 2 xti 2000, 2 xti 4000, 1 IPR 1600 - VSX26
Rack 2: 2 xti 2000, 2 xti 4000, 1 IPR 1600
four PV15M.
1 PVM46, 1 PVM22, 1 PVM 45iR
http://www.thenephewslive.com, Galena, Ohio
Re: VSX26 For Sale
Yep. I still have a Vsx48, a CS4080hz and a pair of GPS2600 and nothing to plug them in to.