Peavey XR600F No sound to speakers

This forum is for talking about all types of Peavey mixers.
Post Reply
olecarweezy
New Member
Posts: 1
Joined: Sun Jun 04, 2017 6:27 pm

Peavey XR600F No sound to speakers

Post by olecarweezy » Sun Jun 04, 2017 6:34 pm

Amp has been stored for 4 years without use. When I put away it was working as normal. I just hooked it up, get the usual pop in the speakers when power switch is flipped, but then no audio in the speakers. The fan is running and green power light lit. I have tried 1/4" and RCA inputs. I have swapped speakers and cables and output ports. When I plug in 1/4" input I can hear the sound very very faintly in the speakers.

That's the extent of my troubleshooting ability. Any assistance would be very much appreciated.

colliedogboy1
Member
Posts: 768
Joined: Thu Sep 20, 2012 1:50 am

Re: Peavey XR600F No sound to speakers

Post by colliedogboy1 » Sun Jun 18, 2017 3:14 pm

Did you try spraying the input and output jacks with contact cleaner and then working the plugs in and out to scrape off the invisible "crud" that can be coating the points of contact inside the jacks?

Post Reply