24FX FOH going silent
Re: 24FX FOH going silent
I think I've done this before, but I'll just post the instructions here.
However, if you damage your mixer by attempting this repair, you will void your warranty. I'm kind of assuming most of these are older (and probably out of warranty), since the fix has been in our production mixers for several years now.
If C93 is already a 100uF cap, then you do not need to apply the modification.
The added cap is a 47uF@35V general purpose cap.
However, if you damage your mixer by attempting this repair, you will void your warranty. I'm kind of assuming most of these are older (and probably out of warranty), since the fix has been in our production mixers for several years now.
If C93 is already a 100uF cap, then you do not need to apply the modification.
The added cap is a 47uF@35V general purpose cap.
- Attachments
-
- FX Mixer Mod2.pdf
- (972.43 KiB) Downloaded 557 times
Re: 24FX FOH going silent
Many thanks Jim!
Re: 24FX FOH going silent
found it easier to put really thin flying leads on the resistors, then add the additional resistor to these leads- cap is not a prob- all working great after the fix
Re: 24FX FOH going silent
OMG, this is my biggest night mare I am trying to avoid happening.
Does this happen to you at any certain volume level ?
D.
Does this happen to you at any certain volume level ?
D.
Re: 24FX FOH going silent
Why Peavey don´t publish Jim H´s solution in your site?
In USA, it´s easy to fix with Peavey.
In Brazil and others country´s, it´s so so so dificultty.
Fernando
In USA, it´s easy to fix with Peavey.
In Brazil and others country´s, it´s so so so dificultty.
Fernando
Re: 24FX FOH going silent
not with mine- very low or high-it just cut outDiego wrote:OMG, this is my biggest night mare I am trying to avoid happening.
Does this happen to you at any certain volume level ?
D.
but the fix sorts it out
Re: 24FX FOH going silent
Good Morning gang
Thanks to Jim H for the instructions on fixing the 24fx I'm in the UK could anybody point me in the right direction to acquire the Resistor P?N 30200126 and the Capacitor P/N 30320344.
Thanks in advance and all the best for the holidays
Anthony
Thanks to Jim H for the instructions on fixing the 24fx I'm in the UK could anybody point me in the right direction to acquire the Resistor P?N 30200126 and the Capacitor P/N 30320344.
Thanks in advance and all the best for the holidays
Anthony
Re: 24FX FOH going silent
maplins in uk mate
got mine there
code for cap= N82KF
got mine there
code for cap= N82KF
Re: 24FX FOH going silent
I'm having an issue with my 32fx main going silent.
Jim can you send me the instructions to resolve this issue.
thanks.
Jim can you send me the instructions to resolve this issue.
thanks.
Re: 24FX FOH going silent
Thanks Chizzychizzy wrote:maplins in uk mate
got mine there
code for cap= N82KF
Re: 24FX FOH going silent
I have this problem on an FX16...need to know fix or where closest service center is (in Ontario, Canada) from Sault Ste. Marie, ON
Re: 24FX FOH going silent
the fix instructions are posted above in this thread ( pdf file)
Re: 24FX FOH going silent
Hey Jim,
I am a new user and therefore, am unable to message you. Would you please PM me the fix for the 24fx? We at my church are experiencing the FOH loss also. I am quite handy with a soldering iron. Thank you in advance.
I am a new user and therefore, am unable to message you. Would you please PM me the fix for the 24fx? We at my church are experiencing the FOH loss also. I am quite handy with a soldering iron. Thank you in advance.
Re: 24FX FOH going silent
Here's the link: https://peavey.com/forum/download/file.php?id=14384rk1day wrote:Hey Jim,
I am a new user and therefore, am unable to message you. Would you please PM me the fix for the 24fx? We at my church are experiencing the FOH loss also. I am quite handy with a soldering iron. Thank you in advance.
-
- New Member
- Posts: 1
- Joined: Fri Jul 21, 2017 6:11 am
Re: 24FX FOH going silent
I am a new user and I am unable to message you. Would you please PM me the fix for the 24fx?