24FX FOH going silent
24FX FOH going silent
Hello. I've been using 24FX for some time and I keep getting the FOH silence issue. It can randomly go silent after using the mixer for a while. I read the forums, so I know what's the problem. However I don't want to send the mixer to a service because of shipping costs etc. I called the the local Peavey distributor/service and I was told that they never heard of this issue before. If I understand correctly the problem is caused by a few capacitors having a wrong value, right? Can I replace them myself?
Re: 24FX FOH going silent
PM me, I can give you instructions.
-
- New Member
- Posts: 3
- Joined: Tue Jul 22, 2014 7:21 am
Re: 24FX FOH going silent
Hello!!!
I have the same issue with the FX16 mixer - master output going off and on randomly... though, sometimes it works perfectly (like when I gave it to a service!!!)
I found out that the thing is in the digital processing section, cause in those moments when it goes off (no sound coming from the master section) the aux outputs 1,2,3,4 are working correctley in my monitors, and also the REC OUT works correctly, but with no efects, so I am now using REC OUT for my FOH (only efects go on and of...).
Please, can somebody HELP, how to solve this problem?
thank you in advance!!!
FatherPinky
I have the same issue with the FX16 mixer - master output going off and on randomly... though, sometimes it works perfectly (like when I gave it to a service!!!)
I found out that the thing is in the digital processing section, cause in those moments when it goes off (no sound coming from the master section) the aux outputs 1,2,3,4 are working correctley in my monitors, and also the REC OUT works correctly, but with no efects, so I am now using REC OUT for my FOH (only efects go on and of...).
Please, can somebody HELP, how to solve this problem?
thank you in advance!!!
FatherPinky
Re: 24FX FOH going silent
Fixing the issue is quite simple. You just have to solder 2 additional components to the digital board. Please send a message to Jim, he will explain what you need to do. If you don't know how to solder I'm sure you'll find someone who will do it for you.
-
- New Member
- Posts: 3
- Joined: Tue Jul 22, 2014 7:21 am
Re: 24FX FOH going silent
wow, cool!!! I already applied for friendship with "Jim H", so I could PM him, just waiting for his response...
I do have a friend here in Rijeka, Croatia who maintains all my studio and live equipment, so he'll know what to do if Jim H replys with the solution and shemes...
khaveer, thx for your quick response!!!
all the best,
fathepinky
I do have a friend here in Rijeka, Croatia who maintains all my studio and live equipment, so he'll know what to do if Jim H replys with the solution and shemes...
khaveer, thx for your quick response!!!
all the best,
fathepinky
-
- New Member
- Posts: 5
- Joined: Wed Jul 23, 2014 6:57 pm
Re: 24FX FOH going silent
is this something peavey has corrected in their new fx2 boards?
Re: 24FX FOH going silent
As far as I know yes.mlc_musicman wrote:is this something peavey has corrected in their new fx2 boards?
-
- Member
- Posts: 675
- Joined: Fri Sep 12, 2008 6:03 pm
- Location: Southwestern CT
- Contact:
Re: 24FX FOH going silent
This is correct. More efficient power supply, and new dual DSP engine processors that are so far bug free (knock on wood) I do about 2-3 shows a month with my 16FX2.mlc_musicman wrote:is this something peavey has corrected in their new fx2 boards?
I had a small part in helping Jim to debug the firmware before the updates became available on the peavey website. All firmware updates come peavey internally now, not a 3rd party coding partner like the first FX generation.
if you run into any issues with the FX2 (or even the first gen FX) def post on here. Many resident smart guys available. Jim H is the top dog at Peavey for the Mixer division so you are in very good company.
Pro Audio 16FX2, PV6USB, 2xQF131, QF215, 2x SP2, 2xSP118, 2xPV1600, PV3800, 4xKPC15MP
Bass - Grind 6 NTB 410TVX, 115BVX, MAX700, 210TVX, MiniMega, VB-2, VB-3, VB-MA
Bass - Grind 6 NTB 410TVX, 115BVX, MAX700, 210TVX, MiniMega, VB-2, VB-3, VB-MA
- Wooferhound
- Member
- Posts: 1249
- Joined: Sun Jun 20, 2010 11:02 pm
- Location: Huntsville Alabama USA
- Contact:
Re: 24FX FOH going silent
I have had some weird problems with my older FX mixer recently. I must say that my hired help has dropped the mixer at some point and there is a significant dent on the left top corner of the mixer. The problem is that the Gain control on a channel becomes inoperative. I opened it up and with a magnifier glass found some solder slivers in the boards. I used a paintbrush and brushed out the total interior. and fixed it the first time, but this problem keeps coming back on different channels on every 2nd show.
Anyway it's kind of strange. The gain is not adjustable but not normally a big problem.
Anyway it's kind of strange. The gain is not adjustable but not normally a big problem.
----- W o o f e r h o u n d -----
-
- New Member
- Posts: 3
- Joined: Wed Sep 17, 2014 8:01 am
Re: 24FX FOH going silent
Same problem with 24FX mixer as Khaveer and FatherPinky posted...
Also applied for frendship with Jim...
Hoping for help and solution...
Also applied for frendship with Jim...
Hoping for help and solution...
Re: 24FX FOH going silent
I have the same problem with FX25 muting MAIN out from time to time.
AUX out are working fine, but with no EQ effects.
waiting for Jim h, hope he will help
AUX out are working fine, but with no EQ effects.
waiting for Jim h, hope he will help
Re: 24FX FOH going silent
I'm not familiar with having to apply for friendship...you can just PM me if you need help.
-
- New Member
- Posts: 3
- Joined: Wed Sep 17, 2014 8:01 am
Re: 24FX FOH going silent
its not possible to PM you.
getting message: "We are sorry, but you are not authorised to use this feature. You may have just registered here and may need to participate more to be able to use this feature."
can you PM me?
getting message: "We are sorry, but you are not authorised to use this feature. You may have just registered here and may need to participate more to be able to use this feature."
can you PM me?
Re: 24FX FOH going silent
Jim h, thank you for PM,
I'm not able to reply or send PM, due to message "We are sorry, but you are not authorised ...."
I'm not able to reply or send PM, due to message "We are sorry, but you are not authorised ...."
-
- New Member
- Posts: 3
- Joined: Wed Sep 17, 2014 8:01 am
Re: 24FX FOH going silent
I fixed mixer by Jim H instructions.
Yesterday my band had 6 hour live performace and everything worked perfectly.
No silent issues any more.
Thanks a lot Jim H.
Yesterday my band had 6 hour live performace and everything worked perfectly.
No silent issues any more.
Thanks a lot Jim H.