I am based in the UK and have been asked to look at a PV14 USB Mixer which switches itself off after a few minutes. About 10 minutes later it can be switched on again, but it will again switch off after a few minutes.
Can anyone help with this problem and/or tell me where I can obtain a circuit diagram. Thank you
PV 14 USB Circuit Diagram
Re: PV 14 USB Circuit Diagram
email [email protected] and ask for a schematic
Peavey stuff:
2X- DJS sub's (USA)
2X- SP4 BX mains (USA
2X- QW 118's (USA)
IPR2 5000
IPR2 5000 DSP
IPR2 7500 DSP
PV 231 EQ
PV 215 EQ
Feedback Ferret D
XR 1220
2X- PV215's
PVI 4B
MS 212 cab (USA)
PV 14 AT
2X- SP15M (USA)
VIP 3
2X- DJS sub's (USA)
2X- SP4 BX mains (USA
2X- QW 118's (USA)
IPR2 5000
IPR2 5000 DSP
IPR2 7500 DSP
PV 231 EQ
PV 215 EQ
Feedback Ferret D
XR 1220
2X- PV215's
PVI 4B
MS 212 cab (USA)
PV 14 AT
2X- SP15M (USA)
VIP 3
Re: PV 14 USB Circuit Diagram
I would try unplugging the supply from the mixer, if something was shorted on the mixer, it could cause the supply to overheat.
Re: PV 14 USB Circuit Diagram
Thanks both for your replies.
I have emailed repairs as suggested.
I will also unplug the main board from the power supply and see if it continues to switch off.
Thanks again.
I have emailed repairs as suggested.
I will also unplug the main board from the power supply and see if it continues to switch off.
Thanks again.
-
- New Member
- Posts: 1
- Joined: Sun Sep 10, 2017 7:51 am
Re: PV 14 USB Circuit Diagram
Did you ever solve this, I am a bit hacked off that a fault has developed so soon and the mixer has been lightly used. Thanks for your help. Larry