There are 16 effects available on my PV20 mixer board.. is there a way of putting one effect on one channel, and then another effect for another channel, and so on..
Or am I bound by one effect across the board..? Thanks for any help..
Fx on mixer PV20 USB
Re: Fx on mixer PV20 USB
The mixer uses a rotary switch to select the effect that is in use...there would be no way to select another. Also, there is only one audio path to the DSP board and back.
To do what you are asking, there would need to be a dedicated audio path from each channel to the DSP board, along with a D/A and A/D converter for each channel. All of which would add a lot of cost to the mixer.
To do what you are asking, there would need to be a dedicated audio path from each channel to the DSP board, along with a D/A and A/D converter for each channel. All of which would add a lot of cost to the mixer.
-
- New Member
- Posts: 1
- Joined: Tue May 09, 2017 6:40 am
Re: Fx on mixer PV20 USB
Hi guys, I have a pv20 and only the right channel works. I am an electronics technician and I am trying to solve the defect but without an electric scheme and impossible, do you have an electrical schematic of it? Note: When leaning on the top of the electrolytic capacitors the left channel lights work.