Fx on mixer PV20 USB

This forum is for talking about all types of Peavey mixers.
Post Reply
Carew
New Member
Posts: 2
Joined: Thu Mar 09, 2017 9:38 am

Fx on mixer PV20 USB

Post by Carew » Thu Mar 09, 2017 10:02 am

There are 16 effects available on my PV20 mixer board.. is there a way of putting one effect on one channel, and then another effect for another channel, and so on..
Or am I bound by one effect across the board..? Thanks for any help..

jim h
Member
Posts: 657
Joined: Fri Sep 12, 2008 11:20 pm

Re: Fx on mixer PV20 USB

Post by jim h » Thu Mar 09, 2017 10:12 am

The mixer uses a rotary switch to select the effect that is in use...there would be no way to select another. Also, there is only one audio path to the DSP board and back.

To do what you are asking, there would need to be a dedicated audio path from each channel to the DSP board, along with a D/A and A/D converter for each channel. All of which would add a lot of cost to the mixer.

frotaitalo
New Member
Posts: 1
Joined: Tue May 09, 2017 6:40 am

Re: Fx on mixer PV20 USB

Post by frotaitalo » Tue May 09, 2017 6:46 am

Hi guys, I have a pv20 and only the right channel works. I am an electronics technician and I am trying to solve the defect but without an electric scheme and impossible, do you have an electrical schematic of it? Note: When leaning on the top of the electrolytic capacitors the left channel lights work.

Post Reply