Hey guys, I'm new here and I'm having an issue. I look forward to any help.
I am running a transtube fex processor through a 50/50 power amp to a 4/12 cab. I hadn't fired it up in some time and now it is "farting" and then cutting out completely.
The green light on the fex lights up so I know I'm getting a signal. The sound will come back intermittently then fade then cut out completely. Shutting off the 50/50 then turning it back on seems to bring the sound back for a short time. The best sound I get is the 5 seconds or so when I turn off the 50/50.
I have plugged direct in to the 50/50 with no problem, and have tried the fex though a combo amp with same results, so I'm convinced its the fex.
Keep in mind that I played the other day for an hour using a heavy distortion patch that gave me no problems. However, some of the patches that used delay and flange and chorus would cut out.
Any ideas?
Peavey Transtube fex problem
-
- New Member
- Posts: 1
- Joined: Thu Jan 19, 2017 1:02 pm
Re: Peavey Transtube fex problem
I'm having the same issue with mine. Were you able to solve this?