PV35XO Fuse?

This forum is for discussions on the various types of Peavey processors and effects.
Post Reply
Helloyou
New Member
Posts: 2
Joined: Tue Apr 10, 2018 10:59 am

PV35XO Fuse?

Post by Helloyou » Tue Apr 10, 2018 11:03 am

Hi all,
Can someone direct me where I can find a replacement fuse that is located in the IEC MAINS CONNECTOR for a PV35xo? The manual says to replace it with a similar fuse but I bought this used and it didn't have one.
Any help would be GREATLY appreciated!

colliedogboy1
Member
Posts: 768
Joined: Thu Sep 20, 2012 1:50 am

Re: PV35XO Fuse?

Post by colliedogboy1 » Tue Apr 10, 2018 8:08 pm

You can take your crossover unit to an electrical supply store and show them the back panel. It indicates a "T100mA L/250V" fuse. The store clerk can find the fuse that fits. It will probably cost you less than a dollar. Buy two or three for "just in case" later on. Don't let the "250V" part throw you off-- It's actually a 120V fuse for use in typical wall outlets. You will have to finagle the fuse holder out by pushing or pulling the little clip inside the spot where the power cord plugs in.
Last edited by colliedogboy1 on Mon Apr 30, 2018 10:02 am, edited 1 time in total.

Helloyou
New Member
Posts: 2
Joined: Tue Apr 10, 2018 10:59 am

Re: PV35XO Fuse?

Post by Helloyou » Tue Apr 10, 2018 10:16 pm

Thanks! I appreciate it.

Post Reply