Autograph
-
jeffbenfrank
- New Member
- Posts: 1
- Joined: Sat Jun 16, 2018 11:45 pm
Autograph
I recently reacquired an Autograph and PVR 1 but have forgotten how to connect to my board...I have a Yamaha EMX 5000-12 and need help please.
-
scott.dickey
- Member
- Posts: 123
- Joined: Thu Feb 07, 2013 8:40 am
Re: Autograph
Hi jeffbenfrank,
Unfortunately I'm not sure if there's a great way to utilize the built in power amp in your Yamaha mixer while using the Autograph. You would go out of the MONO OUT of your mixer into the input of the Autograph, but unfortunately there's not a power amp input on that mixer for the output of the Autograph to go back into. You probably need to go MONO OUT -> AUTOGRAPH INPUT -> AUTOGRAPH OUTPUT -> INPUT of external power amp -> speakers. Seems like sort of a waste considering it's a powered mixer, but there's no power amp input to make that work in an intelligible way.
By the way, here's a link to the old Autograph owner's manual from the archives, might be useful.
https://assets.peavey.com/literature/ma ... 300958.pdf
Unfortunately I'm not sure if there's a great way to utilize the built in power amp in your Yamaha mixer while using the Autograph. You would go out of the MONO OUT of your mixer into the input of the Autograph, but unfortunately there's not a power amp input on that mixer for the output of the Autograph to go back into. You probably need to go MONO OUT -> AUTOGRAPH INPUT -> AUTOGRAPH OUTPUT -> INPUT of external power amp -> speakers. Seems like sort of a waste considering it's a powered mixer, but there's no power amp input to make that work in an intelligible way.
By the way, here's a link to the old Autograph owner's manual from the archives, might be useful.
https://assets.peavey.com/literature/ma ... 300958.pdf
Scott Dickey
Peavey Embedded Software Engineer
Peavey Embedded Software Engineer