RAB-1 Case

This forum is for talking about all kinds of Peavey microphones
Post Reply
User avatar
studiodtk5
Member
Posts: 2240
Joined: Sat Feb 20, 2010 1:39 pm
Location: Toledo, Ohio

RAB-1 Case

Post by studiodtk5 » Thu Jun 04, 2015 6:42 pm

I just purchased my second RAB-1 microphone. A nice sounding microphone and a nice wood case with foam liner. However, the wood case has come broken both times. The case was manufactured with only glued corners. There are no staples or brads in the case to hold the corners together.

I have been able to glue the cases back together. I think Peavey needs to re-evaluate the supplier of the cases.
Darren
ITOC: 08-00190

Peavey stuff I have: Masterpiece 50, Custom Shop 212, Stereo Chorus 212, T-60, T-40, Signature Select, Odyssey II Prototype, Generation Custom EXP, Firenza P90-ACM, VB-2, Stomp Boxes, Radial Pro 1000, lots of mics, etc...

User avatar
studiodtk5
Member
Posts: 2240
Joined: Sat Feb 20, 2010 1:39 pm
Location: Toledo, Ohio

Re: RAB-1 Case

Post by studiodtk5 » Fri Feb 05, 2016 6:03 pm

FOe what it is worth, I just recently purchased two RAC-1 microphones. Same wood case. Both were in excellent condition. Quite possible I had two bad shipping events.

Also, this should show my confidence in this series of ribbon microphone...now I have four in my mic locker.
Darren
ITOC: 08-00190

Peavey stuff I have: Masterpiece 50, Custom Shop 212, Stereo Chorus 212, T-60, T-40, Signature Select, Odyssey II Prototype, Generation Custom EXP, Firenza P90-ACM, VB-2, Stomp Boxes, Radial Pro 1000, lots of mics, etc...

Post Reply