PV-1 wireless
-
- Member
- Posts: 64
- Joined: Fri Jun 17, 2016 12:53 am
PV-1 wireless
I recently purchased 3 brand new in the box PV-1 wireless systems. Hand held mic version that require 9volt. Seems I can't run 3 at the same time. Is there something I'm missing? Do I need to return one and find a unit with a different frequency? Thanks for the help!
invective 120 & cabs, 2 VTM 120s, Tubefex, TG Raxx, Rockmaster preamp, 2 VYPYR 30H, VIP 2, Nano Vypyr, Vypyr 120H, VSS, 6505 Piranha & cab, TMP Tube pre, 45+ Peavey guitars (most USA), tons of Peavey PA gear. 3 HP2s
-
- Member
- Posts: 768
- Joined: Thu Sep 20, 2012 1:50 am
Re: PV-1 wireless
Each mic must be on a different frequency. If you try to operate two mics simultaneously on one frequency, there will be horrible squealing and screeching sounds. At least, that's what happened to me when I accidentally did it several years ago. According to the website, each model is available in three different frequencies.
Last edited by colliedogboy1 on Wed Oct 12, 2016 9:09 pm, edited 1 time in total.
-
- Member
- Posts: 64
- Joined: Fri Jun 17, 2016 12:53 am
Re: PV-1 wireless
That's what I figured, was just unclear if they offered them in multiple frequencies. That's my next job. Contact Peavey for an alternate unit. They're pretty good about that stuff. Thanks again!
invective 120 & cabs, 2 VTM 120s, Tubefex, TG Raxx, Rockmaster preamp, 2 VYPYR 30H, VIP 2, Nano Vypyr, Vypyr 120H, VSS, 6505 Piranha & cab, TMP Tube pre, 45+ Peavey guitars (most USA), tons of Peavey PA gear. 3 HP2s