Peavey Vypyr 15 Preset Foot-Switch WORKS!
- Frank N. Peavey
- Member
- Posts: 1108
- Joined: Sat Sep 13, 2008 7:03 am
- Location: PVnooga, TN
- Contact:
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
Excellent idea! A simple footswitch that doesn't require awkward tap dancing is exactly what I need.
Tony
ITOC #05-00013
T-63, 5 T-60s, T-20, Hydra, Mantis LT, Mystic, Odyssey, 3 Patriot tremolos, Patriot Bass, 2 Predators, 2 Raptor I, Razer, Reactor, Retro Fire, 3 Rockmasters, 2 Bandits, Backstage, Vypyr 30, Vypyr VIP 2
ITOC #05-00013
T-63, 5 T-60s, T-20, Hydra, Mantis LT, Mystic, Odyssey, 3 Patriot tremolos, Patriot Bass, 2 Predators, 2 Raptor I, Razer, Reactor, Retro Fire, 3 Rockmasters, 2 Bandits, Backstage, Vypyr 30, Vypyr VIP 2
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
thank you good sir!Frank N. Peavey wrote:Excellent idea! A simple footswitch that doesn't require awkward tap dancing is exactly what I need.
>Ibanez RG350M
>Ibanez RG8
>Ibanez RG7321
>Ibanez PGM3
>Fender MIM Strat
>Chibson Les Paul
>Lots of Basses
>Peavey Supreme XL 100w w/ 412MS Cab
https://www.reverbnation.com/dustincorbin
http://www.facebook.com/AcidulousTheBand
>Ibanez RG8
>Ibanez RG7321
>Ibanez PGM3
>Fender MIM Strat
>Chibson Les Paul
>Lots of Basses
>Peavey Supreme XL 100w w/ 412MS Cab
https://www.reverbnation.com/dustincorbin
http://www.facebook.com/AcidulousTheBand
-
- New Member
- Posts: 3
- Joined: Tue Jun 26, 2012 4:08 pm
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
djcdude95... what you think can my wiring work? it dont needed grounding? i will make unplugging FS for Vypyr 15.
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
i didnt need any grounding, as long as all the wires arent shorting out, all should work. i would add a plug so u could to unplug it. i have since sold my 15 and got a 75w with the Sanpera 2.ITIetalista wrote:djcdude95... what you think can my wiring work? it dont needed grounding? i will make unplugging FS for Vypyr 15.
>Ibanez RG350M
>Ibanez RG8
>Ibanez RG7321
>Ibanez PGM3
>Fender MIM Strat
>Chibson Les Paul
>Lots of Basses
>Peavey Supreme XL 100w w/ 412MS Cab
https://www.reverbnation.com/dustincorbin
http://www.facebook.com/AcidulousTheBand
>Ibanez RG8
>Ibanez RG7321
>Ibanez PGM3
>Fender MIM Strat
>Chibson Les Paul
>Lots of Basses
>Peavey Supreme XL 100w w/ 412MS Cab
https://www.reverbnation.com/dustincorbin
http://www.facebook.com/AcidulousTheBand
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
I know this is an older post, but it inspired me to do something similar (see photos).
Note that all in-amp switches are grounded on one side, which means that separate return lines for each switch are not needed. Only one return (ground) wire is needed, so with six switches (I added the TAP switch) there will be 7 wires total. This fits within 8-pin Ethernet couplers and cable for wiring (CAT5e or 6). It is relatively easy to use Keystone RJ45 adapters/couplers to join the wiring between inside the amp and inside the footswitch using standard Ethernet cable.
Note that all in-amp switches are grounded on one side, which means that separate return lines for each switch are not needed. Only one return (ground) wire is needed, so with six switches (I added the TAP switch) there will be 7 wires total. This fits within 8-pin Ethernet couplers and cable for wiring (CAT5e or 6). It is relatively easy to use Keystone RJ45 adapters/couplers to join the wiring between inside the amp and inside the footswitch using standard Ethernet cable.
- Attachments
-
- ftsw-top.jpg (78.15 KiB) Viewed 3627 times
-
- ftsw-bk.jpg (66.19 KiB) Viewed 3627 times
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
Looks great! I'm glad 4 years later this still is relevant to the masses.clampit wrote:I know this is an older post, but it inspired me to do something similar (see photos).
Note that all in-amp switches are grounded on one side, which means that separate return lines for each switch are not needed. Only one return (ground) wire is needed, so with six switches (I added the TAP switch) there will be 7 wires total. This fits within 8-pin Ethernet couplers and cable for wiring (CAT5e or 6). It is relatively easy to use Keystone RJ45 adapters/couplers to join the wiring between inside the amp and inside the footswitch using standard Ethernet cable.
>Ibanez RG350M
>Ibanez RG8
>Ibanez RG7321
>Ibanez PGM3
>Fender MIM Strat
>Chibson Les Paul
>Lots of Basses
>Peavey Supreme XL 100w w/ 412MS Cab
https://www.reverbnation.com/dustincorbin
http://www.facebook.com/AcidulousTheBand
>Ibanez RG8
>Ibanez RG7321
>Ibanez PGM3
>Fender MIM Strat
>Chibson Les Paul
>Lots of Basses
>Peavey Supreme XL 100w w/ 412MS Cab
https://www.reverbnation.com/dustincorbin
http://www.facebook.com/AcidulousTheBand
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
Anybody on here doing these kind of mods at a fair price.
Thank you
Thank you