Peavey Vypyr 15 Preset Foot-Switch WORKS!
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
http://forums.peavey.com/download/file.php?id=7736
Very cool mod,for the 15! I have an Idea.
Ok,we need a 10-conductor cable,right?,and,a socket for transportation convienience,right?
Here's my Idea:
You must have 'mastered' some good soldering skills to do this.
**********This Modification will VOID your WARRANTY,Proceed with caution*************
***********Un-Plug*********The*********AMP******************************
(1)Find an old,discarded desktop computer tower,that would otherwise go to the trash.
(2)Gather some good quality multi-colored hook-up wire
(3)Take out the IEEE socket(printer output)...2 of these would be better,but,1 will work.....see where this is going yet?
(4)Install one of the IEEE sockets on the Vypyr back,(this will void your warranty!)will need to 'cut out'a rectangular sized hole big enough for the socket.(this is where wiring gets complicated)as the diagram posted shows,in the previous post.A voltmeter set to Ohms would be a 'plus' for the wiring,to the pedal.
(5)(optional)Install the other socket on your homebrewed footpedal.
(6)Now,with almost everything USB nowdays,if you are like me,you probably have a few printer cords in a 'junk'box somewhere.Also,some of the 'older' ones are shielded,another plus!
(7)If you did the wiring right,you now have a pedal'out'jack.
(8)Can't find another IEEE socket?just cut the plug off the'pedal'end,and,solder directly to the switches.Keep notes on what color goes where.
Hope this helps.This is just my idea.I take NO responsibility in what YOU do to YOUR amp.
Very cool mod,for the 15! I have an Idea.
Ok,we need a 10-conductor cable,right?,and,a socket for transportation convienience,right?
Here's my Idea:
You must have 'mastered' some good soldering skills to do this.
**********This Modification will VOID your WARRANTY,Proceed with caution*************
***********Un-Plug*********The*********AMP******************************
(1)Find an old,discarded desktop computer tower,that would otherwise go to the trash.
(2)Gather some good quality multi-colored hook-up wire
(3)Take out the IEEE socket(printer output)...2 of these would be better,but,1 will work.....see where this is going yet?
(4)Install one of the IEEE sockets on the Vypyr back,(this will void your warranty!)will need to 'cut out'a rectangular sized hole big enough for the socket.(this is where wiring gets complicated)as the diagram posted shows,in the previous post.A voltmeter set to Ohms would be a 'plus' for the wiring,to the pedal.
(5)(optional)Install the other socket on your homebrewed footpedal.
(6)Now,with almost everything USB nowdays,if you are like me,you probably have a few printer cords in a 'junk'box somewhere.Also,some of the 'older' ones are shielded,another plus!
(7)If you did the wiring right,you now have a pedal'out'jack.
(8)Can't find another IEEE socket?just cut the plug off the'pedal'end,and,solder directly to the switches.Keep notes on what color goes where.
Hope this helps.This is just my idea.I take NO responsibility in what YOU do to YOUR amp.
Last edited by teray5150 on Sun Jun 26, 2011 1:20 am, edited 1 time in total.
Peavey 5150 Combo
Peavey Classic VTX series 212
Peavey MX VTX series
Peavey Classic Chorus 212
Fender Strat
Ibanez Millenium Destroyer
Frankenstrat
Peavey Rockmaster Tube Pre-Amp
Ibanez Digital Delay DM2000
Peavey ADDverb
MXR Effects
Peavey Vypyr 15
Peavey Classic VTX series 212
Peavey MX VTX series
Peavey Classic Chorus 212
Fender Strat
Ibanez Millenium Destroyer
Frankenstrat
Peavey Rockmaster Tube Pre-Amp
Ibanez Digital Delay DM2000
Peavey ADDverb
MXR Effects
Peavey Vypyr 15
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
very good idea. i had an idea like this but i just dont have the parts. thanks for taking interest in my mod.teray5150 wrote:Very cool mod,for the 15! I have an Idea.
Ok,we need a 10-conductor cable,right?,and,a socket for transportation convienience,right?
Here's my Idea:
You must have 'mastered' some good soldering skills to do this.
**********This Modification will VOID your WARRANTY,Proceed with caution*************
***********Un-Plug*********The*********AMP******************************
(1)Find an old,discarded desktop computer tower,that would otherwise go to the trash.
(2)Gather some good quality multi-colored hook-up wire
(3)Take out the IEEE socket(printer output)...2 of these would be better,but,1 will work.....see where this is going yet?
(4)Install one of the IEEE sockets on the Vypyr back,(this will void your warranty!)will need to 'cut out'a rectangular sized hole big enough for the socket.(this is where wiring gets complicated)as the diagram posted shows,in the previous post.A voltmeter set to Ohms would be a 'plus' for the wiring,to the pedal.
(5)(optional)Install the other socket on your homebrewed footpedal.
(6)Now,with almost everything USB nowdays,if you are like me,you probably have a few printer cords in a 'junk'box somewhere.Also,some of the 'older' ones are shielded,another plus!
(7)If you did the wiring right,you now have a pedal'out'jack.
(8)Can't find another IEEE socket?just cut the plug off the'pedal'end,and,solder directly to the switches.Keep notes on what color goes where.
Hope this helps.This is just my idea.I take NO responsibility in what YOU do to YOUR amp.
>Ibanez RG350M
>Ibanez RG8
>Ibanez RG7321
>Ibanez PGM3
>Fender MIM Strat
>Chibson Les Paul
>Lots of Basses
>Peavey Supreme XL 100w w/ 412MS Cab
https://www.reverbnation.com/dustincorbin
http://www.facebook.com/AcidulousTheBand
>Ibanez RG8
>Ibanez RG7321
>Ibanez PGM3
>Fender MIM Strat
>Chibson Les Paul
>Lots of Basses
>Peavey Supreme XL 100w w/ 412MS Cab
https://www.reverbnation.com/dustincorbin
http://www.facebook.com/AcidulousTheBand
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
You Bet!,I've always got some 'Wheels Turnin' about recycling stuff folks usually throw away.When I get my Vypyr 15,in next week,I might look into this.Thanx!
-Or,any other type of multi-conductor connector would work.The possibilities are endless.Radio Shack used to sell multi-conductor cable by the foot,back in the 'old days'.Since they cut their SKU's down,I doubt they still have it.It was called "data cable".
Printer cable is pretty big diameter stuff,but,it's all I could think of that came to mind,as most of us still have one somewhere.I'll Google "10-conductor cable",and,see what we can get for this project.Sounds awesome.
Great Mod,Thanx
-Or,any other type of multi-conductor connector would work.The possibilities are endless.Radio Shack used to sell multi-conductor cable by the foot,back in the 'old days'.Since they cut their SKU's down,I doubt they still have it.It was called "data cable".
Printer cable is pretty big diameter stuff,but,it's all I could think of that came to mind,as most of us still have one somewhere.I'll Google "10-conductor cable",and,see what we can get for this project.Sounds awesome.
Great Mod,Thanx
Last edited by teray5150 on Sat Jun 25, 2011 11:33 pm, edited 1 time in total.
Peavey 5150 Combo
Peavey Classic VTX series 212
Peavey MX VTX series
Peavey Classic Chorus 212
Fender Strat
Ibanez Millenium Destroyer
Frankenstrat
Peavey Rockmaster Tube Pre-Amp
Ibanez Digital Delay DM2000
Peavey ADDverb
MXR Effects
Peavey Vypyr 15
Peavey Classic VTX series 212
Peavey MX VTX series
Peavey Classic Chorus 212
Fender Strat
Ibanez Millenium Destroyer
Frankenstrat
Peavey Rockmaster Tube Pre-Amp
Ibanez Digital Delay DM2000
Peavey ADDverb
MXR Effects
Peavey Vypyr 15
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
your welcome, and if you have any problems with the mod(although i think its pretty easy) feel free to Message me, and i could give you my email.teray5150 wrote:You Bet!,I've always got some 'Wheels Turnin' about recycling stuff folks usually throw away.When I get my Vypyr 15,in next week,I might look into this.Thanx!
>Ibanez RG350M
>Ibanez RG8
>Ibanez RG7321
>Ibanez PGM3
>Fender MIM Strat
>Chibson Les Paul
>Lots of Basses
>Peavey Supreme XL 100w w/ 412MS Cab
https://www.reverbnation.com/dustincorbin
http://www.facebook.com/AcidulousTheBand
>Ibanez RG8
>Ibanez RG7321
>Ibanez PGM3
>Fender MIM Strat
>Chibson Les Paul
>Lots of Basses
>Peavey Supreme XL 100w w/ 412MS Cab
https://www.reverbnation.com/dustincorbin
http://www.facebook.com/AcidulousTheBand
- WashburnTabu
- Member
- Posts: 1335
- Joined: Thu Aug 13, 2009 11:04 pm
- Location: Childersburg, Alabama
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
Here's what I did. I used to have a server with this stuff on it.
My name is WT, and I approve this opinion.
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
Nice!
Peavey 5150 Combo
Peavey Classic VTX series 212
Peavey MX VTX series
Peavey Classic Chorus 212
Fender Strat
Ibanez Millenium Destroyer
Frankenstrat
Peavey Rockmaster Tube Pre-Amp
Ibanez Digital Delay DM2000
Peavey ADDverb
MXR Effects
Peavey Vypyr 15
Peavey Classic VTX series 212
Peavey MX VTX series
Peavey Classic Chorus 212
Fender Strat
Ibanez Millenium Destroyer
Frankenstrat
Peavey Rockmaster Tube Pre-Amp
Ibanez Digital Delay DM2000
Peavey ADDverb
MXR Effects
Peavey Vypyr 15
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
i actually saw your video on youtube, thats what inspired me to to the mod in the first place. you are one of the few people ive seen who actually have done this and made it public. i actually am lookin into the stompbox mod next.WashburnTabu wrote:Here's what I did. I used to have a server with this stuff on it.
>Ibanez RG350M
>Ibanez RG8
>Ibanez RG7321
>Ibanez PGM3
>Fender MIM Strat
>Chibson Les Paul
>Lots of Basses
>Peavey Supreme XL 100w w/ 412MS Cab
https://www.reverbnation.com/dustincorbin
http://www.facebook.com/AcidulousTheBand
>Ibanez RG8
>Ibanez RG7321
>Ibanez PGM3
>Fender MIM Strat
>Chibson Les Paul
>Lots of Basses
>Peavey Supreme XL 100w w/ 412MS Cab
https://www.reverbnation.com/dustincorbin
http://www.facebook.com/AcidulousTheBand
- WashburnTabu
- Member
- Posts: 1335
- Joined: Thu Aug 13, 2009 11:04 pm
- Location: Childersburg, Alabama
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
The stomp mod is pretty simple, the confusing part is the physical wiring of the switch you choose. Driegs mod kit is the best way to go.
My name is WT, and I approve this opinion.
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
umm a little questiondjcdude95 wrote:After seeing a few videos and some posts on the forums, i decided to make my very own footswitch for my Vypyr 15. I know Sanpera isn't compatible, and i wasnt going to spend money on a midi adapter for the circuit board. So i made a box with 5 switches, 1 to each preset (4), and 1 to the bank switch, and wired them to the circuit board directly onto the original switch contacts. Pretty sweet if you ask me. And it works perfectly.
what do you all think about it?
Ill post more pics and give more detailed instructions if y'all want.
you cant plug it out right?
its always connected to the amp?
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
the way i showed you does make it so u cant unplug it, however, you can buy a 10 pin connector of some sort and wire it to the existing wires you have. i plan on doing this once i find a connector.AvivX wrote:umm a little questiondjcdude95 wrote:After seeing a few videos and some posts on the forums, i decided to make my very own footswitch for my Vypyr 15. I know Sanpera isn't compatible, and i wasnt going to spend money on a midi adapter for the circuit board. So i made a box with 5 switches, 1 to each preset (4), and 1 to the bank switch, and wired them to the circuit board directly onto the original switch contacts. Pretty sweet if you ask me. And it works perfectly.
what do you all think about it?
Ill post more pics and give more detailed instructions if y'all want.
you cant plug it out right?
its always connected to the amp?
>Ibanez RG350M
>Ibanez RG8
>Ibanez RG7321
>Ibanez PGM3
>Fender MIM Strat
>Chibson Les Paul
>Lots of Basses
>Peavey Supreme XL 100w w/ 412MS Cab
https://www.reverbnation.com/dustincorbin
http://www.facebook.com/AcidulousTheBand
>Ibanez RG8
>Ibanez RG7321
>Ibanez PGM3
>Fender MIM Strat
>Chibson Les Paul
>Lots of Basses
>Peavey Supreme XL 100w w/ 412MS Cab
https://www.reverbnation.com/dustincorbin
http://www.facebook.com/AcidulousTheBand
- WashburnTabu
- Member
- Posts: 1335
- Joined: Thu Aug 13, 2009 11:04 pm
- Location: Childersburg, Alabama
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
8 conductor lan cable and rj45 lan jack worked well for me. Home despot or the like will have it.
My name is WT, and I approve this opinion.
-
- New Member
- Posts: 3
- Joined: Tue Jun 26, 2012 4:08 pm
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
djcdude95 wrote:8 conductor lan cable and rj45 lan jack worked well for me. Home despot or the like will have it.
please wiring diagram...WashburnTabu wrote:the way i showed you does make it so u cant unplug it, however, you can buy a 10 pin connector of some sort and wire it to the existing wires you have. i plan on doing this once i find a connector.
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
i dont have one, i just kinda winged it. the pictures i have in the document should be somewhat helpful.ITIetalista wrote:djcdude95 wrote:8 conductor lan cable and rj45 lan jack worked well for me. Home despot or the like will have it.please wiring diagram...WashburnTabu wrote:the way i showed you does make it so u cant unplug it, however, you can buy a 10 pin connector of some sort and wire it to the existing wires you have. i plan on doing this once i find a connector.
>Ibanez RG350M
>Ibanez RG8
>Ibanez RG7321
>Ibanez PGM3
>Fender MIM Strat
>Chibson Les Paul
>Lots of Basses
>Peavey Supreme XL 100w w/ 412MS Cab
https://www.reverbnation.com/dustincorbin
http://www.facebook.com/AcidulousTheBand
>Ibanez RG8
>Ibanez RG7321
>Ibanez PGM3
>Fender MIM Strat
>Chibson Les Paul
>Lots of Basses
>Peavey Supreme XL 100w w/ 412MS Cab
https://www.reverbnation.com/dustincorbin
http://www.facebook.com/AcidulousTheBand
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
Bravo ! Necessity is the mother of invention.
As you may progress in you electronic abilities something you may want to consider for your future mechanical switch designs; some switch debounce circuitry. It remedies the potential for glitches.
Check out this link
http://www.eetimes.com/discussion/break ... e-Problems
Enjoy your future in music electronics.
Cheers
As you may progress in you electronic abilities something you may want to consider for your future mechanical switch designs; some switch debounce circuitry. It remedies the potential for glitches.
Check out this link
http://www.eetimes.com/discussion/break ... e-Problems
Enjoy your future in music electronics.
Cheers
’74 SG, ’90 G&L ASAT, Fender ’51, Epiphone Wilshire.
Peavey Vypyr 100, Sovtek MIG 50, modded Crate V18, Quilter designed Sand Amp, ’64 VOX T60 1x15 + 1x12 bottom
Even harmonics prevail.
Peavey Vypyr 100, Sovtek MIG 50, modded Crate V18, Quilter designed Sand Amp, ’64 VOX T60 1x15 + 1x12 bottom
Even harmonics prevail.
-
- New Member
- Posts: 3
- Joined: Tue Jun 26, 2012 4:08 pm
Re: Peavey Vypyr 15 Preset Foot-Switch WORKS!
Can it WORK?...we can use 10pin mini USB too i think check picture --->
- Attachments
-
- Vypyr 15 FS.png (82.07 KiB) Viewed 9718 times