The amp software does not effect (Control) the master volume. Does your guitar have active pickups, The vypyr's were designed for passive pickups. The pre gain is volume before the preamp and the post gain is volume after the preamp. The master is volume for the power amp. It's sounds like you like to max the pre and or post gain. You can use the sponge ( see manual ) to control clean or distortion at lower volume settings. Try experimenting with the pre and post gain and the sponge. If you have active pickups turn down the volume on the guitar.Landshark wrote:any chance in a future software update that the Master Volume can be made more linear?!?!?!?!?
i got rid of my 6505+ head for that reason - it had three volume settings:
0 .... no sound
0-0.75 .... home level
anything past 0.75 .... STADIUM LEVELS!!!!
i replaced it with a XXX head that has a much more linear volume.
the home usable range on the Vyper Pro for me is below 1 on the volume knob. if i breathe on the knob a little, my extreme volume level warning siren (wife) goes off.
Also if you have sanpera The pedal controls the volume between 0 and the number you set on the master volume. The information I gave works for me. I set the master at 5 and let the presets take care of All other settings.