Need a DSP board
-
- New Member
- Posts: 7
- Joined: Sat Feb 25, 2017 10:41 pm
Need a DSP board
I dug my old Vypyr 15 out of storage to chop down the enclosure and convert it to a head, which worked well..... except i smacked the DSP board with the drill bit when i was installing the output jack on the chassis. I dislodged the C72 220uF cap and ripped the legs off it in the process. I ordered a replacement cap, but I'd like to see if i can get a board if this doesnt work.
Re: Need a DSP board
Last I checked (given that Peavey still has boards) the boards were 100 plus bucks form Peavey. Your best bet would be to pickup another 15 for 40 to 50 bucks.Rumblebox1 wrote:I dug my old Vypyr 15 out of storage to chop down the enclosure and convert it to a head, which worked well..... except i smacked the DSP board with the drill bit when i was installing the output jack on the chassis. I dislodged the C72 220uF cap and ripped the legs off it in the process. I ordered a replacement cap, but I'd like to see if i can get a board if this doesnt work.
Peavey HP Special FT in Blue Moon Burst, Vypyr 30 with Effects Loop, Zoom G5, Vypyr Pro 100.
-
- New Member
- Posts: 7
- Joined: Sat Feb 25, 2017 10:41 pm
Re: Need a DSP board
True story
Re: Need a DSP board
You can get a new board, but it is cheaper to buy another Vypyr 15.j_fury68 wrote:Last I checked (given that Peavey still has boards) the boards were 100 plus bucks form Peavey. Your best bet would be to pickup another 15 for 40 to 50 bucks.Rumblebox1 wrote:I dug my old Vypyr 15 out of storage to chop down the enclosure and convert it to a head, which worked well..... except i smacked the DSP board with the drill bit when i was installing the output jack on the chassis. I dislodged the C72 220uF cap and ripped the legs off it in the process. I ordered a replacement cap, but I'd like to see if i can get a board if this doesnt work.
HAPPY DAYS:
-
- New Member
- Posts: 7
- Joined: Sat Feb 25, 2017 10:41 pm
Re: Need a DSP board
So i replaced the cap with one of equal value, and the preamp on each model is still weak. About half the gain as they should have.