I currently have a VIP3 with Sanpera 2 pedal, and a AT 200 WITHOUT the breakout box. I would like to have a breakout box to update software and also to power my guitar instead of batteries. (Can't find one.) So.. Does anyone know if the Pro100 will power the guitar and also if Sanpera 2 pedal is compatible with the amp? ANY HELP PEAVEY??? $$$$
Looking at the manual it appears you still connect the amp MIDI out to the breakout and then to the guitar
AT 200 and Pro 100
-
- Member
- Posts: 87
- Joined: Mon Dec 26, 2011 11:23 pm
Re: AT 200 and Pro 100
No, the Pro100 will not power the AT-200...you'll need to find a Breakout box to do that. And good luck, as the AT-200 has been discontinued.
Try Craigslist if you can't find any at the music stores you usually purchase gear from. Good luck!
Try Craigslist if you can't find any at the music stores you usually purchase gear from. Good luck!
Last edited by Lord High Warlock on Tue Jul 18, 2017 1:28 am, edited 1 time in total.
- Warlock/LHW/Rich
Guitars
2011 Gibson Les Paul Studio '50s Tribute
2015 Epiphone Masterbilt DR-500MCE
2016 Peavey AT-200
1964 Goya F-27
Amps
Peavey Vypyr Pro w/ Sanpera Pro
Marshall AS100D & MG10cd
VOX Valvetronix VT80+
Guitars
2011 Gibson Les Paul Studio '50s Tribute
2015 Epiphone Masterbilt DR-500MCE
2016 Peavey AT-200
1964 Goya F-27
Amps
Peavey Vypyr Pro w/ Sanpera Pro
Marshall AS100D & MG10cd
VOX Valvetronix VT80+
-
- Member
- Posts: 87
- Joined: Fri Jun 16, 2017 11:15 am