Good day! I am from Kazakhstan.
Tell me please))
How connect the Digitool MX to Computer?
In order to create or load presets?
Thank you very much for your help!
Digitool MX
-
- Member
- Posts: 4478
- Joined: Mon Oct 27, 2008 3:50 pm
Re: Digitool MX
privEt Привет!
Chebakov,
Have you already down loaded the Graphic User Interface program? If not please go to this URL:
http://aa.peavey.com/
You will need a RS-232 (DB-9) non-null modem cable to interface your computer with the Digitool MX via the RS-232 ports.
I have attached some info that may help. Also the following 2 URL's are about X-Over basics. The one that I attached (X-Overs 2009) is advanced info.
http://www.peavey.com/support/technotes ... r101_a.cfm
http://www.peavey.com/support/technotes ... r102_a.cfm
If you have any further questions you can PM me.
Удачи!
Chebakov,
Have you already down loaded the Graphic User Interface program? If not please go to this URL:
http://aa.peavey.com/
You will need a RS-232 (DB-9) non-null modem cable to interface your computer with the Digitool MX via the RS-232 ports.
I have attached some info that may help. Also the following 2 URL's are about X-Over basics. The one that I attached (X-Overs 2009) is advanced info.
http://www.peavey.com/support/technotes ... r101_a.cfm
http://www.peavey.com/support/technotes ... r102_a.cfm
If you have any further questions you can PM me.
Удачи!
- Attachments
-
- Crossover 2009.DSP.pdf
- (278.2 KiB) Downloaded 707 times
-
- Digitool MX Special AppL.pdf
- (95.17 KiB) Downloaded 809 times
-
- Digitool Documentation[1].pdf
- (365.13 KiB) Downloaded 876 times