ACT Rack X - Angel(Retro412)
The same process for this as the Michael(1960A). Source goes in Source folder, Targets go in Targets folder, preset gets imported. Same channels and Eqs are here(re-profiled for use with Angel) - See list in Michael(1960A).
I'll be adding other amps once I find them. This set comes with an Engl Fireball 100 amp profile. I'm working on getting down the noise by gating, I just have to locate the right place to cut it, without cutting too much. Other than that it's good
Extra preset(slight variation
*Click/disengage the bypass button on the zen overdrive for more of a vanilla sound(all presets)
ACT Rack X - Angel(Retro412)
Moderators: Michael Ljunggren, ReValver Support Team
ACT Rack X - Angel(Retro412)
Last edited by Spacekid on Sun Aug 14, 2016 1:17 pm, edited 1 time in total.
Re: ACT Rack X - Angel(Retro412)
*Slight Noise Reduced preset versions.
Re: ACT Rack X - Angel(Retro412)
Engl Pwerball Amp profile
It took a while to find a good one, but it turned out really smooth. A Preset is included. Move amp to amps folder and import preset in Revalver
---Getting more experience with what you can mix together----
---the next one mixes elements and I worked with the mic relation to the cab(mic/cab1)which is very helpful.----
*Be sure to turn on the ACT Rack modules
-well my short vacation is over, see you at Christmas with more--(have fun):)-
oh,BTW: click the bypass button on the ZenMan OD/boost. (all presets) ---You're welcome
----------------------------------------------------------------------------sharing is caring--------------------------------------------------------------------------------------
It took a while to find a good one, but it turned out really smooth. A Preset is included. Move amp to amps folder and import preset in Revalver
---Getting more experience with what you can mix together----
---the next one mixes elements and I worked with the mic relation to the cab(mic/cab1)which is very helpful.----
*Be sure to turn on the ACT Rack modules
-well my short vacation is over, see you at Christmas with more--(have fun):)-
oh,BTW: click the bypass button on the ZenMan OD/boost. (all presets) ---You're welcome
----------------------------------------------------------------------------sharing is caring--------------------------------------------------------------------------------------
Last edited by Spacekid on Mon Aug 15, 2016 1:54 pm, edited 20 times in total.
Re: ACT Rack X - Angel(Retro412)
*I found the noise - It's coming from the "Lead Gain 3" knob on the Angel amp. Pull it down and boost the lead volume or master to get rid of it. It slightly affects the tone on output, so it's a trade-off.