A teaser/tester: RAT(distortion pedal set, 4 more to do) *NEW: Character Filters: Boutique Tube(15 more to do)
(check back in a week for a bigger package of anything I can pull a profile from)
(you can grab the original Michael(1960A) source to couple with the target from the first forum topic, or copy it from the example preset*edit:come to think of it, you can't do this..you have to grab it from the first topic, save from ACT Rack)
Compete Character Filters for Michael(1960A):
Complete Pedals for Michael(1960A)
I'll catch up with the other models Targets soon
-
[attachment=13]RAT - Celeste.rev4preset.sa[/attachment]
[attachment=12]RAT - Celeste(S2).rev4preset.sa[/attachment]
[attachment=11]RAT - Chunky(Revision).rev4preset.sa[/attachment]
If you pick up just 1 preset, get the one below:
[attachment=10]RAT-PickMePickMeYeah.rev4preset.sa[/attachment]
[attachment=9]RAT - Vanilla Melt.rev4preset.sa[/attachment]
NEWEST IS BELOW(except Secret Melt 1-3, you'll have to look through the forum to find them)
5-Pack Melt: Internal Tube-switching(matching) + High-Pass/Mid Q Tweaks:
[attachment=8]Melt Pack.rev4bank.sa[/attachment]
Melt Pack(R): BlackDeath internal Tweaks
[attachment=7]Melt Pack(R).rev4bank.sa[/attachment]
[attachment=6]Fireball Melt.rev4preset.sa[/attachment]
[attachment=5]Jet City Melt.rev4preset.sa[/attachment]
[attachment=4]Jet City Melt Bottom's up.rev4preset.sa[/attachment]
[attachment=3]Jet City Vanilla Model(for the Purists).rev4preset.sa[/attachment]
[attachment=2]Soldano(for the Purists II).rev4preset.sa[/attachment]
Another WTF from Revalver
ACT Rack X - New Target(s)
Moderators: Michael Ljunggren, ReValver Support Team
ACT Rack X - New Target(s)
- Attachments
-
- Soldano(for the Purists II).rev4preset.sa
- (81.1 KiB) Downloaded 327 times
-
- Jet City Vanilla Model(for the Purists).rev4preset.sa
- For the Purists
- (80.68 KiB) Downloaded 318 times
-
- Jet City Melt Bottom's up.rev4preset.sa
- The true Newest
- (79.55 KiB) Downloaded 317 times
-
- Jet City Melt.rev4preset.sa
- newest
- (79.55 KiB) Downloaded 304 times
-
- Fireball Melt.rev4preset.sa
- almost the newest
- (79.8 KiB) Downloaded 314 times
-
- Melt Pack(R).rev4bank.sa
- (494.97 KiB) Downloaded 328 times
-
- Melt Pack.rev4bank.sa
- (506.53 KiB) Downloaded 309 times
-
- RAT - Vanilla Melt.rev4preset.sa
- (100.32 KiB) Downloaded 311 times
-
- RAT-PickMePickMeYeah.rev4preset.sa
- The layman says it can't be done in Revalver. Not now :)
- (97.39 KiB) Downloaded 315 times
-
- RAT - Chunky(Revision).rev4preset.sa
- Chunky with a better Mid Q for low end crunch
- (98.68 KiB) Downloaded 322 times
-
- RAT - Celeste(S2).rev4preset.sa
- (94.01 KiB) Downloaded 305 times
-
- RAT - Celeste.rev4preset.sa
- (96.68 KiB) Downloaded 310 times
Last edited by Spacekid on Sat Aug 20, 2016 10:41 am, edited 24 times in total.
-
- Member
- Posts: 266
- Joined: Tue May 01, 2012 8:58 am
- Location: Crossroads of America
Re: ACT Rack X - New Target(s)
I'm nowhere near my 'puter, but are you doing the Rat pedal into an amp, or a Rat tube amp?
84 PV T60, Heritage, Vypyr 30, SanperaII; Win7-64 Home Prem SP-1
& updated - Intel DP43BF P43 w/ Core2 Quad Q8300 4G RAM - ATI
HD 4550 512MB vid - 2xWD Blk SATA 3 750G HD, Asus BD-RW -
EMU 1820M w/ Reaper-64 3.78 - PV ReValver 4 - ADA8000 - LM16
& updated - Intel DP43BF P43 w/ Core2 Quad Q8300 4G RAM - ATI
HD 4550 512MB vid - 2xWD Blk SATA 3 750G HD, Asus BD-RW -
EMU 1820M w/ Reaper-64 3.78 - PV ReValver 4 - ADA8000 - LM16
Re: ACT Rack X - New Target(s)
Hi I'm doing an (emulated) RAT pedal. My process is 1) get source ..which I already have, I just did the Michael(1960A) so far as a test to see if this works. I then take that same source file, and use it on everything I do for (Michael(1960A)) in this case. 2) With DAW open I place my pedal in the chain: RAT pedal(emulated)-----Revalver 4 software(using the same preset/setting as I did when making my source patch). 3) I place an ACT Rack in my Revalver 4 source software preset(I actually already had one in my preset because I used one when making my source file). 4) "Learn" a source file with the ACT Rack. --This file then gets named as the RAT Target file, to be used with the original source file that I made. I'm just separating the Source files by name of Revalver amp used + cab used. For the original Source file, I'm using default Revalver amp settings + mic/cabinet settings(place them where they will be good to stay later on as a default) and that's it..no effects are being used on the (Master) Source file creation.
The surprise is that it actually works to profile things like distortion EQ curves
The surprise is that it actually works to profile things like distortion EQ curves
Re: ACT Rack X - New Target(s)
Hey Propbeanie, I was just noticing your system specs. I'm starting to push 53% CPU on my presets. I have an Athlon X2 3.00 GHz with 8GB of RAM. I think you may be safe for a while until the modules keep piling up(the C-verb Rack units take the most, just disable them)..If they do. I'm not sure yet what else can be done besides EQ, Channel, AMP & Distortion Pedals..maybe other pedals? IDK. I'm working on using an audio stream splitter to do a harmonizer..but that's just an idea I'm floating in my head at this point. More-or-less working out the fundamentals of what I would need to get it to work properly. but IDK, maybepropbeanie wrote:I'm nowhere near my 'puter, but are you doing the Rat pedal into an amp, or a Rat tube amp?
New addition: Basic 100 - Cali 410
https://soundcloud.com/spacekid1-1/b100mod