Problem when I save the knoobs of input and output gain

ReValver product discussion. This is a user-to-user forum, and not product support.

Moderators: Michael Ljunggren, ReValver Support Team

Locked
mecomogoriano
New Member
Posts: 1
Joined: Wed Jan 27, 2016 1:03 am

Problem when I save the knoobs of input and output gain

Post by mecomogoriano » Wed Jan 27, 2016 1:14 am

I have a problem with Revalver 4. I have a personal folder and i save all my personal presets .....I save all and close the program but when i open the program I have the presets with the knoobs input and output moved. ...the parameters of the pedals....amp....etc...perfect..but I have a problem with the knoobs input and output.
I think that can I do save all because when I open a preset the knoobs change.
And the gig mode the same....

my question is....there are a way to save "all preset" wit the gains?

Thanks

Spacekid
Member
Posts: 329
Joined: Thu Aug 28, 2014 2:24 pm

Re: Problem when I save the knoobs of input and output gain

Post by Spacekid » Thu Feb 11, 2016 11:55 am

I don't think that the knobs (for input and output) save.

wheelman
Member
Posts: 132
Joined: Mon Mar 03, 2014 1:41 pm

Re: Problem when I save the knoobs of input and output gain

Post by wheelman » Thu Feb 18, 2016 10:36 am

I think it's possible to save the input gain by using the "Save Default" button on the left most panel of the input adjustment tools.
As far as I can tell this is not preset specific though, it's a global setting.
I hope that makes sense..

I haven't found a way to save the output tools settings.
I'd REALLY like Peavey to add this ability or explain how to do it if it's already there.
Lately I've been experimenting with running the output from Revalver into a Zoom G3 via USB. The Zoom output is connected to the effects loop return of my Valveking 212. This lets me use the power amp of the Valveking but the drawback is the VK is not a master volume amp so I have to be real careful when switching presets in Revalver. On some I have to set the output gain to 5db to get a good volume from the VK, but others with higher gain amps need to have it cranked down to -25db. This assumes I don't adjust the output settings of the Zoom, which I try to avoid.

Ultimately it would be very useful to have the option to save both the input and output setups as part of a preset and independent of the presets.
My thinking here is the input gain is more guitar dependent but the output gain is more related to gear setup in the preset.

So, what about it Peavey, is this funcitonality something that will be added in the future?

Wheelman

Lain
Member
Posts: 588
Joined: Fri Jan 25, 2013 7:05 am
Location: Germany

Re: Problem when I save the knoobs of input and output gain

Post by Lain » Thu Feb 18, 2016 10:53 am

The "save default" button is for the pickup RMS, not the input.
And when i save a preset the value of the input button, the output button and the rms value gets saved in that preset.
Need more info from OP about OS/DAW/etc.

wheelman
Member
Posts: 132
Joined: Mon Mar 03, 2014 1:41 pm

Re: Problem when I save the knoobs of input and output gain

Post by wheelman » Thu Feb 18, 2016 6:32 pm

Thanks for the clarification Lain. :)
I'm going to have to try saving one of the presets I've been messing with after adjusting the settings for the input/output gain.
See if I can create a set of presets that work well with my setup.

Wheelman

Lain
Member
Posts: 588
Joined: Fri Jan 25, 2013 7:05 am
Location: Germany

Re: Problem when I save the knoobs of input and output gain

Post by Lain » Fri Feb 19, 2016 4:06 am

You gotta make sure that you save your presets in a bank that you made yourself.

wheelman
Member
Posts: 132
Joined: Mon Mar 03, 2014 1:41 pm

Re: Problem when I save the knoobs of input and output gain

Post by wheelman » Fri Feb 19, 2016 10:24 am

Lain wrote:You gotta make sure that you save your presets in a bank that you made yourself.
Yep, I independently stumbled across that requirement last night.
The input and output gain and other settings are indeed saved with the preset if you save it into a new bank.
It appears the only thing that isn't is the pickup RMS setting.
I'm not sure how critical that setting is, I measured 3 of my guitars last night (2 had humbuckers, 1 had single coils) with an oscilloscope.
The humbuckers ranged from ~600mV to ~1000mV, the single coils ranged from ~200mV up ~350mV.
All of them sound fine through Revalver and I didn't notice much difference when I adjusted the pickup RMS to match the guitar.
I can see how it might help if the pickups are either real weak or very hot.

Wheelman

Lain
Member
Posts: 588
Joined: Fri Jan 25, 2013 7:05 am
Location: Germany

Re: Problem when I save the knoobs of input and output gain

Post by Lain » Mon Feb 22, 2016 3:11 pm

The RMS value gets saved too.

Cabezapel
Member
Posts: 13
Joined: Tue Apr 18, 2017 7:48 pm

Re: Problem when I save the knoobs of input and output gain

Post by Cabezapel » Tue Apr 18, 2017 7:51 pm

Hi, i have the same problem, don't save any change made in the output mixer, anyone have a solution for this?, thank you very much.

Cabezapel
Member
Posts: 13
Joined: Tue Apr 18, 2017 7:48 pm

Re: Problem when I save the knoobs of input and output gain

Post by Cabezapel » Mon May 08, 2017 3:43 pm

The solution for this problem is download and install the last version of Revalver, that's all.

Locked