Howdy,
does anybody knows the size of the wrench for adjustment of the truss rod on this guitar ?
Any help will be appreciated .
Thanks.
Peavey Impact I truss rod wrench size.
-
- Member
- Posts: 31314
- Joined: Fri Sep 12, 2008 3:10 pm
- Location: The Mountain Retreat [Cincinnati Ohio]
Re: Peavey Impact I truss rod wrench size.
Not sure of exact size but do know the Friendly Local Sears Store can be Xtremely helpful.
Take Impact to Sears and ask assistance of a Craftsman Hardware & Tool Salesman.
Take Impact to Sears and ask assistance of a Craftsman Hardware & Tool Salesman.
PAF Classic Series Tube Kit.......Created By Classic30inCincy
Majic Mojo Tradename..........Created By Classic30inCincy
Graduate Of Joe Friday / Dragnet School Of Correspondence
Doctorate Degree Diplomacy From Royal Order Possum Lodge
- Roger Crimm
- Member
- Posts: 963
- Joined: Wed Sep 10, 2008 3:03 pm
- Location: Meridian, MS USA
- Contact:
Re: Peavey Impact I truss rod wrench size.
It is 5/16". You will need a very thin wall socket, so you probably won't find one at Sears. You can get one from our Parts Dept. Peavey part# is 75031006.
http://www.peavey.com/support/contactinfo/
http://www.peavey.com/support/contactinfo/
Re: Peavey Impact I truss rod wrench size.
If you happen to have a 5/16 socket and an Allen wrench that will fit into the socket nicely, that'll work. What I use. Or get the actual tool and not worry about it.
I ♥ Peavey________
Ensoniq VFX
Korg Monotron
Korg Triton
Peavey Fury 1992
Peavey KB-300
Peavey Milestone 1984
Roland JX-8P
Waldorf Micro Q
Yamaha KM802
Yamaha KX5
Yamaha SY77
Ensoniq VFX
Korg Monotron
Korg Triton
Peavey Fury 1992
Peavey KB-300
Peavey Milestone 1984
Roland JX-8P
Waldorf Micro Q
Yamaha KM802
Yamaha KX5
Yamaha SY77
Re: Peavey Impact I truss rod wrench size.
Thank you all for the responses.
I'll buy the wrench from the parts depm.
I'll buy the wrench from the parts depm.