Peavey Milestone BXP Jazz Bass Wiring Help
-
- New Member
- Posts: 1
- Joined: Sat Nov 16, 2019 5:31 pm
Peavey Milestone BXP Jazz Bass Wiring Help
Two white wires came unsoldered from the neck volume pot and I am unsure where to solder them back. Can someone please help? Thanks in advance.
- Attachments
-
- E563E99C-F000-4C66-A2CF-27D91DC263BB.jpeg (2.28 MiB) Viewed 3141 times
-
- Member
- Posts: 325
- Joined: Wed May 28, 2014 6:05 pm
- Location: Scotland
Re: Peavey Milestone BXP Jazz Bass Wiring Help
Hi jaxplanner
One of those "whites" should be black.
No matter,it's only a colour. With the pot lugs facing you, I'll number them 1 to 3. Left hand being 1.
There should be a white running from lug 1 on neck volume to lug 1 bridge volume,it then continues to lug 2 of the tone pot.
The other white (black) is a a ground soldered to the back of the volume pots.
You'll see what I mean from this PDF.
One of those "whites" should be black.
No matter,it's only a colour. With the pot lugs facing you, I'll number them 1 to 3. Left hand being 1.
There should be a white running from lug 1 on neck volume to lug 1 bridge volume,it then continues to lug 2 of the tone pot.
The other white (black) is a a ground soldered to the back of the volume pots.
You'll see what I mean from this PDF.
- Attachments
-
- MILESTONE III %26 Milestone BXP wiring.pdf
- (36.11 KiB) Downloaded 340 times
Axcelerator,B-90,B-Quad,Cirrus,Dyna,Dyna/Unity,Foundations,Forum,Fury,Gbass,Grind,International,midibase,Milestone III, Millenniums,Patriot,Resolite,RJ-IV,Sarzo,3 T40,T45,T20,TL-5,Tragic,Unity,Void,Zephyr5,3 Zodiac.