IPR2™ 3000 Lightweight Power Amp

Order the IPR2™ 3000 Lightweight Power Amp from Peavey. Best-in-class sound quality. Electric, bass & acoustic guitars. Pro audio equipment, speakers, amps & more.
Item No: 03609520
You Save:40%
USD $599.99
Expected Soon! Jan 21, 2022
Product Description

IPR2™ 3000 Lightweight Power Amp
IPR2 power amplifiers, designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers the sonic superiority and unsurpassed reliability for which Peavey is famous, in an extremely efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures, and does not require massive heat sinks to cool.

  • 2- Channel independent fourth-order Linkwitz-Riley crossovers
  • DDT
  • Revolutionary IPR class D topology
  • Combi XLR 1/4" inputs
  • Speakon output connectors
  • Light Weight
  • LED illuminated
  • Detented input controls
  • 1750w at 2 ohms
  • 950w at 4 ohms
  • 525w at 8 ohms
  • Individual signal pass 1/4" jacks on each channel.
  • Weight Unpacked: 8.16 lb(3.7 kg)
  • Weight Packed: 10.80 lb(4.9 kg)
  • Width Packed: 12.5"(31.75 cm)
  • Height Packed: 21"(53.34 cm)
  • Depth Packed: 4.7"(11.938 cm)

Product Highlights
Corey Arford of
Corey Arford
Jordan Lockrey of
Jordan Lockrey
IPR2 2000/3000 Owners Manual
Cut Sheet

Customer Review

Q & A
Subject: Ipr2 3000 questions
Discussion: I just purchased the ipr2 3000 to power a Mackie profx22 mixer. I have 2 15inch mains and I'm considering adding passive subs to the set up. I'm not sure how to do it. The amp has the sub and high pass switches. 1. What are the through/out jack in the input section used for? 2. Should I just daisy chain the subs to channel A and Mains on Channel B? Peavey Response: 1. THRU/OUT JACKS This 1/4” (6.3mm) jack is a parallel connection to the input connector for patching to this amplifier and/or additional power amplifier inputs. A TRS plug must be used to maintain a balanced connection. Page 23 of the owner's manual. 2. If this is your only amp and you are running a MONO system, then yes you would do this.
Jeremy Mitchell

Subject: Amp question
Discussion: I have 2 Peavey SP218 Subs. Which Peavey ipr2 amp do I need to use with these speakers? I also have 2 Peavey SP2 speakers. Which Peavey ipr2 amp do you recommend for these? Thank you for your help. I am getting ready to purchase new amps. Peavey Response: The recommended items are: For the SP218 and the SP2, use the IPR 5K. This all does depend on the age of the speakers as well.