The Peavey® SP®4P is a powered, bi-amplified, two-way speaker system engineered to provide very high levels of performance in a compact powered loudspeaker. This quasi-three-way powered system is comprised of a 1000 W peak switching power amplifier driving a pair of 15" Black Widow® BWX series woofers, now with a long throw voice coil. The 2" RX™22CT titanium diaphragm compression driver is driven by a 500 W peak switching power amplifier, and is coupled to a low coloration waveguide with a coverage pattern of 100° horizontal by 50° vertical.
The SP®4P is capable of up to 131 dB peak SPL. The enclosure is constructed of plywood augmented with internal braces, covered with a textured black painted finish. The shape is a trapezoidal form, with a full-length coated perforated steel grille, to offer an attractive yet durable powered speaker system. A pair of four-way inset handles, one on each side, and a set of casters on the bottom rear edge and a top rear handle provide convenient transport and handling. Multiple fly points are provided to allow overhead rigging. The cabinet and grille are black.
Two independent mixed input channels each offer a balanced input to the preamp/EQ electronics, and a level control. Each channel has one combo female XLR and 1/4" TRS phone jack. It is switchable between mic-level and line-level sensitivity. Channel 2 has a 3.5 mm media jack added. A line out section has male XLR connectors. The Thru outputs allow linking of additional speaker systems, or feed of the signal to a powered subwoofer, etc.
The power amplifiers providing the bi-amplification are low-distortion switching units providing 1000 W peak available power into the nominal 4 ohm load of the woofer, and a 500 W peak available power into the nominal 8 ohm load of the tweeter. The power supply for both amps is a switch mode type for low weight and high efficiency. Both amplifiers feature our DDT™ compression, which virtually eliminates audible power amplifier clipping. Cooling is via forced air circulation.
The combination of the Black Widow® BWX woofer with the RX™22CT tweeter and DSP crossover and EQ provide a clarity and impact beyond conventional powered enclosures. The switching power amps and switch-mode power supply, along with the professional grade speaker components, provide this high level of technological sophistication at a very light weight, while at a very reasonable cost.
|BI-AMPLIFIED POWERED SPEAKER SYSTEM|
|EQ PRESETS AVAILABLE VIA ROTARY ENCODER PUSHBUTTON SELECT|
|9-BAND EQ AND OTHER SYSTEM SETTINGS ACCESSED VIA ROTARY ENCODER PUSHBUTTON SELECT|
|DYNAMIC BASS BOOST FUNCTION|
|UP TO 150 MS OF ARCHITECTURAL DELAY|
|DSP BASED CROSSOVER, LIMITING AND EQ|
|TWO INDEPENDENT MIXED INPUT CHANNELS, WITH GAIN CONTROL AND MIC/LINE GAIN SWITCH|
|EACH CHANNEL FEATURES A COMBO JACK WITH 1/4" TRS & FEMALE XLR BALANCED INPUT|
|INPUT 2 HAS A 3.5 MM (1/8") STEREO MEDIA INPUT JACK|
|OUTPUT CONNECTORS ARE MALE XLR|
|FOUR-WAY INSET HANDLES ON EACH SIDE|
|PEAK SPL UP TO 131 DB WITH MUSIC!|
|TILT-BACK CASTERS AND TOP REAR BACK HANDLE|
|PEAVEY RX™22CT COMPRESSION DRIVER TWEETER ON A QUADRATIC THROAT WAVEGUIDE|
|FULL LENGTH PERFORATED STEEL GRILLE|
|TWO 15" BLACK WIDOW® BWX WOOFERS|
|RUGGED PLYWOOD ENCLOSURE, WITH BRACING AND DADO CONSTRUCTION|
|BOTH POWER AMPS HAVE DDT COMPRESSION|
|REDUCED WEIGHT - ONLY 93 POUNDS!|
|1000 WATTS PEAK AVAILABLE WOOFER POWER, 500 WATTS PEAK AVAILABLE TWEETER POWER|
|MULTIPLE FLY POINTS|
|FAN COOLED FOR MAXIMUM RELIABILITY|
|Weight Unpacked: 104.72 lb(47.5 kg)|
|Weight Packed: 109.13 lb(49.5 kg)|
|Width Packed: 19.688"(50.00752 cm)|
|Height Packed: 47.25"(120.015 cm)|
|Depth Packed: 19.688"(50.00752 cm)|