Bandit® Supreme Teal Stripe Preamp Pedal

$199.99

The Bandit Supreme pedal packs the legendary raw sound of the 2nd-gen Peavey Bandit 112/Supreme 160 “Teal Stripe” lead channel into a rugged amp-in-a-box for your pedalboard.

SKU: 03621630
  • Faithfully recreates the circa-1990 Peavey Bandit® 112/Supreme™ 160 "Teal Stripe" lead-channel circuit in a pedal.
  • SUPERSAT™ transistor-based tube-distortion simulation delivers soft-clipping overdrive.
  • Shape your sound with independent distortion and post-gain level controls.
  • Three-band active Bottom, Body, and Edge EQ provides up to 15 dB of boost or cut per band.
  • Gain switch boosts overall gain, while the Shift switch selects a higher or lower midrange EQ frequency.
  • Hard-bypass switching with anti-click circuitry ensures quiet switching.
  • Versatile output connects to power amps, effects returns, mixers, recording setups, PA systems, and pedalboards.
  • Runs on a standard 9V battery or a 9V DC center-negative power supply.

Channels

Teal Stripe Lead

Impedance

1 Kohm Output

TRS

1/4" Audio I/O

Bandit® Supreme Teal Stripe Preamp Pedal

Bandit® Supreme Teal Stripe Preamp Pedal

$199.99

$199.99

Authentic Bandit Tone

It’s an exact re-creation of the lead channel circuit found in the prized Bandit 112 (circa 1990) and the Supreme 160 “Teal Stripe” amplifiers.

Explosive Gain Range

With Pre and Post gain controls, a gain boost switch, and a mid-shift switch, you can dial in everything from crispy crunch to oversaturated distortion.

EQ to the Extreme

Controls for Bottom, Body, and Edge offer up to 15dB of boost or cut, giving you the power to shape your sound however you want.

Internal 18V Power

Enjoy responsive dynamics and ultra-low noise with the Bandit Supreme’s internal bipolar 18V power supply.

Turning My Fender into a Peavey Bandit: Teal Stripe Bandit Tones in a Box!

Peavey Teal Stripe Preamp Bandit/Supreme Pedal Review – Classic Sound?

The EPIC Peavey Bandit Sound in a pedal!

Authentic Bandit Tone

FAQ

The Peavey Bandit Supreme Teal Stripe Preamp Pedal recreates the lead-channel circuit of the circa-1990 Bandit 112 and Supreme 160 amplifiers. It brings their distinctive drive sound to your pedalboard, with adjustable gain, three-band EQ, and a Mid Shift switch.

Yes. Connect the Bandit Supreme’s output to your guitar amp’s input, or connect it to an effects-loop return to use the pedal as your preamp. For the amp-input setup, start with a clean sound so you can hear the pedal’s gain and EQ adjustments clearly.

Mid Shift changes the frequency affected by the Body EQ knob. Together, these controls shape fuller or scooped mids; the Body knob determines how much midrange you boost or cut.

Supersat adjusts distortion, the Gain switch increases overall gain, and Post Gain controls output volume. Dial in your preferred saturation first, then adjust Post Gain to balance your volume.

Bottom controls bass, Body adjusts midrange, and Edge shapes treble. Each active EQ control offers up to 15 dB of boost or cut for shaping weight, presence, and bite.

No. Use a 9V DC center-negative supply or a 9V battery. The pedal generates its 18V operating supply internally, so an external 18V adapter is not required.

TURN CLEAN INTO TEAL STRIPE

Turn any clean channel into a Bandit 112/Supreme 160 “Teal Stripe” lead channel

FULL MIDS TO ’80S THRASH

Mid-shift switches between full-bodied mids and scooped ‘80s thrash metal tone

DIAL IN EXTREME GAIN

Pre- and post-gain control plus gain switch for extreme gain potential

Circuit Recreation of the second-generation Peavey Bandit 112/Supreme 160 “Teal Stripe” lead channel, circa 1990

Distortion SUPERSAT transistor-based tube-distortion simulation with soft clipping

Controls SUPERSAT, Post Gain, Bottom, Body, and Edge

Low-frequency EQ Bottom active shelving control, ±15 dB boost/cut

Midrange EQ Body active peak/notch control, ±15 dB boost/cut

High-frequency EQ Edge active shelving control, ±15 dB boost/cut

Gain switch Boosts overall system gain

Shift switch Selects a higher or lower operating frequency for the Body EQ control

Bypass Hard bypass with anti-click circuitry

Input Instrument signal input

Output Signal output for connection to a power amp, effects return, mixer, recording system, PA system, instrument amplifier, or signal processor

Output impedance 1 kΩ

Power requirements 9V DC, center-negative barrel-type power supply, or 9V battery

Power supply reference Peavey #30908180

Battery reference Peavey #00050130

Compliance Independently tested and formally approved for worldwide EMC and FCC compliance

Bandit® Supreme Teal Stripe Preamp Pedal Manual

If you have questions concerning product operation, support or warranty, please Contact Us!

We can also be reached by phone at 877-732-8391 (toll free in the US).

WARNING: This product can expose you to chemicals, including DEHP, which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Find Your Perfect Match

View collection
Bandit® Supreme Teal Stripe Preamp Pedal
Bandit® Supreme Teal Stripe Preamp Pedal

$199.99

Peavey-Decade-Preamp-Effects-Pedal-1.jpg
Decade™ Preamp Effects Pedal

$199.99

VTM™ Preamp Pedal
VTM™ Preamp Pedal

$199.99

View detail

Best for

’90s rock, alternative, crunch and leads

Classic Circuit

Circa-1990 Bandit 112/Supreme 160 lead channel

Gain & Tone Controls

SuperSat® and Post gain; Gain boost; Mid Shift; active three-band EQ

Power & Bypass

9V supply/battery; internal 18V; hard bypass with anti-click circuit

Sound Character

Balanced, punchy crunch through saturated distortion

Most Notable Feature

Gain boost and Mid Shift with wide-ranging active EQ

View detail

Best for

Players seeking gritty, mid-forward drive and fuzz-like saturation

Classic Circuit

Original circa-1980 Decade amplifier

Gain & Tone Controls

Pre/Post Gain; three-band EQ; switchable Saturation

Power & Bypass

9V supply/battery; internal 24V; hard bypass with anti-click circuit

Sound Character

Raw, wiry and mid-forward with rich harmonics

Most Notable Feature

Switchable Saturation for signature Decade grit

View detail

Best for

Players seeking aggressive vintage crunch with extensive response customization

Classic Circuit

Circa-1987 VTM 60/120 preamp

Gain & Tone Controls

Pre/Post Gain; passive three-band EQ; eight response DIP switches

Power & Bypass

9V supply/battery; internal high-voltage TransTube® supply; hard bypass with anti-click circuit

Sound Character

Aggressive, articulate, vintage tube-like crunch

Most Notable Feature

Eight DIP switches for response customization

Artists