Peavey

Bandit® Supreme Teal Stripe Preamp Pedal

$199.99

Authentic Bandit Tone

It’s an exact re-creation of the lead channel circuit found in the prized Bandit 112 (circa 1990) and the Supreme 160 “Teal Stripe” amplifiers.

Explosive Gain Range

With Pre and Post gain controls, a gain boost switch, and a mid-shift switch, you can dial in everything from crispy crunch to oversaturated distortion.

EQ to the Extreme

Controls for Bottom, Body, and Edge offer up to 15dB of boost or cut, giving you the power to shape your sound however you want.

Internal 18V Power

Enjoy responsive dynamics and ultra-low noise with the Bandit Supreme’s internal bipolar 18V power supply.

SKU: 03621630
  • Faithfully recreates the circa-1990 Peavey Bandit® 112/Supreme™ 160 "Teal Stripe" lead-channel circuit in a pedal.
  • SUPERSAT™ transistor-based tube-distortion simulation delivers soft-clipping overdrive.
  • Shape your sound with independent distortion and post-gain level controls.
  • Three-band active Bottom, Body, and Edge EQ provides up to 15 dB of boost or cut per band.
  • Gain switch boosts overall gain, while the Shift switch selects a higher or lower midrange EQ frequency.
  • Hard-bypass switching with anti-click circuitry ensures quiet switching.
  • Versatile output connects to power amps, effects returns, mixers, recording setups, PA systems, and pedalboards.
  • Runs on a standard 9V battery or a 9V DC center-negative power supply.

Channels

Teal Stripe Lead

Impedance

1 Kohm Output

TRS

1/4" Audio I/O

Peavey-Bandit-Supreme-Teal-Stripe-Preamp-Pedal-1.webp

Bandit® Supreme Teal Stripe Preamp Pedal

$199.99

$199.99

FAQ

Circuit Recreation of the second-generation Peavey Bandit 112/Supreme 160 “Teal Stripe” lead channel, circa 1990

Distortion SUPERSAT transistor-based tube-distortion simulation with soft clipping

Controls SUPERSAT, Post Gain, Bottom, Body, and Edge

Low-frequency EQ Bottom active shelving control, ±15 dB boost/cut

Midrange EQ Body active peak/notch control, ±15 dB boost/cut

High-frequency EQ Edge active shelving control, ±15 dB boost/cut

Gain switch Boosts overall system gain

Shift switch Selects a higher or lower operating frequency for the Body EQ control

Bypass Hard bypass with anti-click circuitry

Input Instrument signal input

Output Signal output for connection to a power amp, effects return, mixer, recording system, PA system, instrument amplifier, or signal processor

Output impedance 1 kΩ

Power requirements 9V DC, center-negative barrel-type power supply, or 9V battery

Power supply reference Peavey #30908180

Battery reference Peavey #00050130

Compliance Independently tested and formally approved for worldwide EMC and FCC compliance

Bandit® Supreme Teal Stripe Preamp Pedal Manual

If you have questions concerning product operation, support or warranty, please Contact Us!

We can also be reached by phone at 877-732-8391 (toll free in the US).

WARNING: This product can expose you to chemicals, including DEHP, which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Find Your Perfect Match

Artists