IPR2™ 7500 Lightweight Power Amp

Order the IPR2™ 7500 Lightweight Power Amp from Peavey. Best-in-class sound quality. Electric, bass & acoustic guitars. Pro audio equipment, speakers, amps & more.
Item No: 03004250
MSRP:$1,799.99
You Save:33%
USD $1,199.99
Expected Soon! Nov 03, 2023
Product Description

IPR2™ 7500 Lightweight Power Amp
IPR2 power amplifiers, designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers the sonic superiority and unsurpassed reliability for which Peavey is famous, in an extremely efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures, and does not require massive heat sinks to cool.

  • 4750 watts 2 Channels @ 2 Ohms
  • 2800 watts 2 Channels @ 4 Ohms
  • 1550 watts 2 Channels @ 8 Ohms
  • 3750W RMS x 2 at 2 ohms
  • 2022W RMS x 2 at 4 ohms
  • 1250W RMS x 2 at 8 ohms
  • 2 channel independent, fourth-order Linkwitz-Riley crossovers
  • DDT protection
  • Revolutionary IPR class D topology
  • Detented input controls
  • Combination XLR 1/4" inputs
  • 4 pole twist lock output connectors
  • Ultra-light weight
  • Individual signal pass 1/4" jacks on each channel
  • LED illuminated
  • Standby, LED power present indication
  • Weight Unpacked: 14.57 lb(6.61 kg)
  • Weight Packed: 18.39 lb(8.34 kg)
  • Width Packed: 21"(53.34 cm)
  • Height Packed: 21.2"(53.848 cm)
  • Depth Packed: 6"(15.24 cm)

Product Highlights
Corey Arford of
Carnifex
Corey Arford
Carnifex
Jordan Lockrey of
Carnifex
Jordan Lockrey
Carnifex
Resources
Manual
IPR2 5000/7500 Manual
IPR2 translations
Cut Sheet
SpecSheet
Image
Reviews

Customer Review

Q & A
Discussions
Gio
[email protected]
Subject: IPR2 7500
Discussion: I’d like to know if is safe to drive this amp at 2 ohms for long periods of time, and also reliability. Peavey Response: The amp itself can handle the 2 Ohm load. It all depends on how you define "long period of time." I personally will not run a 2 Ohm load due to not having head room on the amp. This is the one place you need headroom. When you do not have that then you go to drive the system you begin running into a brick wall because the amp will already be giving you all she has. Not to mention with extensive lengths of time you could start to have thermal issues and power supply issues. 2-3 hours running the system nominally like you should you will be fine.
Jamie Day

Subject: Peavey ipr2 7500
Discussion: Could I run the Peavey SP4G 4 Ohm and Peavey SP2 8 Ohm and piggy-back them so that I would have the SP4 and SP2 on the left? I think the ohms would be 2.6 on each channel. I am doing an outside event and am curious if this would be possible and okay to do. Peavey Response: Yes, you would be able to do this.